HDPE Pipe Saddle Fusion Welding Equipment
In heat fusion joining, mating surfaces are prepared, simultaneously melted with a hot-plate heater, the heater is removed, and the melted surfaces are pressed together and held under pressure. As the molten materials cool, they mix and fuse into a permanent, monolithic joint. Performance Pipe fusion procedures require specific tools and equipment for the fusion type and for the sizes of pipe and fittings being joined.
• Butt fusion is used to make end-to-end joints between “butt” or plain end pipes and fittings that have the same outside diameter and like wall thickness. Our Yuda has RDH series Hydraulic butt fusion welding machines and RDH-A series CNC HDPE Butt Welders
• Saddle (sidewall) fusion is used to install a branch outlet fitting to the top or side of a main pipe.Tapping tee fittings are usually installed on top of the main, and branch or service saddle fittings on
the side of the main. After the joint has cooled, the main pipe wall is pierced (tapped) to enable flow through the branch. “Hot tapping” is saddle fusion to a “live” or pressurized main. Our Yuda has MRH series Fitting fusion Machines for Saddle tee, and MRH-A series CNC saddle welding equipment.
• Socket fusion is used to join 4” IPS and smaller tubing and pipe to socket fittings. Socket fittings are available for certain Performance Pipe PE materials. You can choose our RDS series socket welder and RDS-T series PPR Socket welding machine.
1.Suitable for fabricating PE reducing tee in a workshop. Integrated function of welding and taping enables it can complete the whole fabricating process
2.Removable PTFE coated heating mould
3.Control panel accompaines with CNC system to eliminate any risk of error due to the operator
4. Full-Automatic welding procedures with PLC and Touch screen
5. Welding statistics recording and printing function.
6. Linear guide ways are equipped with main pipe clamps, branch pipe clamps, knife tool and heat mould
Optional Parts:
* Heat Moulds
* Drilling Tool
Detailed Photos of Polyethylene Pipe Saddle fusion equipment
Model
|
MRH-A630
|
MRH-A1200
|
MRH-A1800
|
MRH-A2000
|
|
Working range
|
Reducing tee
|
|
Max. Temp heating plate
|
270ºC
|
270ºC
|
270ºC
|
270ºC
|
|
System pressure ranges
|
0~20MPa
|
0~20MPa
|
0~20MPa
|
0~20MPa
|
|
Working voltage
|
380V,50Hz
|
380V,50Hz
|
380V,50Hz
|
380V,50Hz
|
|
Heating plate power
|
6 KW
|
16 KW
|
25KW
|
32 KW
|
|
Hydraulic unit power
|
2.2 KW
|
2.2 KW
|
3KW
|
5.5KW
|
|
Drill motor power
|
2.2 KW
|
3 KW
|
4KW
|
5.5KW
|
Power
|
10.4KW
|
21.2KW
|
32KW
|
46KW
|
HDPE Fitting Saddle Welding Machine Projects
Poly Pipe Reducing Tees Fabrication Machines Exported
Q: Which parts of butt fusion machine are produced by your company?
A: We are manufacturer. All aluminum parts are done by ourselves, we have moulds for heating plate, planing tool, aluminum stub end device, inserts, narrow clamps for all RDHS, RDH, RGH, MRH, RDT series. Even PTEF coating ,steel basic frame, painting are all done by ourselves,too. welcome to visit our factory.
Q: What's your delivery for standard machine?
A: We have stock for most machines for RDH series up to 1200mm; sometimes one stock for 1600mm; also stock for RGH315.450, 630, 1200 Multi-angle fitting welding machine and DQJ630, 800, 1200 Multi-angle cutting machine, MRH630 saddle fusion machine & MQJ315 arched surface cutter in stock too. You can choose which one you want
Q: Does your company provide machine training?
A: It is available, you can choose to come to our factory to learn machine installation, operating, machine maintenance etc, also we can arrange our engineer to your factory for detailed training,even online training available too.