Handheld OTDR

JX8001 palm OTDR is the newest instrument designed for testing FTTx network. Its mainly used to measure the physical characteristics of optical fiber, such as the length,the transmission loss and the splicing loss etc.. It can also locate the event point and faults point of optical fiber. Its widely applied in the manufacture, construction and maintenance in optical fiber communication system.

JX8001 palm OTDR has the most advanced technology of double-color & material integrative mould,which is novel and beautiful in appearance.JX8001 offers three wavelengths and VFL in one handheld unit. In addition, its equipped with comfortable gallus for carrying conveniently.

Mainly features:

handheld,lightweight and convenience for carrying

The most advanced technology of double-color & material integrative mould in trade

Advanced anti-reflective TFT LCD,visible clearly in field

1.6m extra-short event dead zone

With the automatic monitoring function of Communication light

0.25m high resolution,65534 sampling points

With automatic measurement mode,one-button operating

Double USB interfaces, supporting USB stick and direct cable download to PC via ActiveSync

Supporting Bellcore GR196 file format in writing or reading

With the Function of intelligent indicating of remaining capacity of battery and warning if the voltage of battery is low.

WinCE operation system, double operating interface of Chinese and English

Built-in lithium battery with high capacity for over 10 hours of operating life

Visible fault locating (VFL)

Universal FC/PC,FC/SC,FC/ST connector type, its convenient for surface cleaning

Unique function of updating system on-line, returning to factory is unnecessary

 

JX8001 palm OTDR has extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.

High-speed auto measurement

The function of auto measurement of JX8001 palm OTDR makes it unnecessary to operator to know about the further details of operating. Simply connect the fiber, press [Start],then the result is displayed in a few seconds, you can view the trace and event table.

High-speed auto analyzation

JX8001 can search and locate the events and faults in trace rapidly and precisely, and then lists all events in even table, so its very useful to maintainers to improving efficiency and its unnecessary to know about the relative background knowledge.

Powerful file management

JX8001 offers powerful function of file management. Besides saving,browsing or deleting files to or from USB stick and built-in memory, it can be connected to laser or inkjet printer based on PCL language, and the testing report can be printed rapidly and easily. In addition,JX8001 with PC using ActiveSync via USB cable, through which the files can be translated rapidly.

Convenient VFL

The built-in 650nm visual fault location is ideal for easily identifying bad splice, bad connector, break or macro bend.

Communication light check

When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, the JX8001 OTDR can detect automatically and silently if communication light is present after the fiber under test is connected, once the light is verified present, simultaneously, a warning message will be displayed and internal OTDR protection will be active instantly.

Application:

JX8001 Palm OTDR is mainly used to measure FTTx network, it provides a low cost solution for users. JX8001 offers three measuring modes: manual mode (including real time mode and average mode), auto mode and dead zone mode.

Manual measurement mode: manual mode is suitable for skilled operator who is familiar with the instrument. In this measurement mode, to get more accurate results, real-time mode or average mode can be selected if necessary.

In real-time mode, the dynamic changes of fiber chain can be detected timely, it is very useful when you need to observe the effect and process of fiber being spliced or connected.

In average measurement mode, the noise in trace can be suppressed, and the SNR(signal noise ratio) is improved, therefore,the result is more accurate. In fact, the more average times is executed, the more noise in trace is suppressed, and the longer time is spent for signal processing. In practice, the average times should be set properly according to necessity.

Auto measurement mode: the optimized measurement conditions are set automatically, its unnecessary to operator to know about the complicated background knowledge and the further details of operating. In this mode, the more accurate results can be gained when proper average times are set, but it will increase the time of signal processing.

Dead zone mode: this mode is suitable for testing optical fiber with short distance and the optimized settings of distance range, pulse width and attenuator can be executed automatically. To get the best result, the terminal return loss should be guaranteed less than -40dB.