Gigabit Ethernet Fiber Converter Support SNMP

Specifications Name: aggregation Protocol Converter

STM-1 interface: 2

GE interface: 2

Support SNMP webmaster

Support 1+1 protected

Gigabit Ethernet Fiber Converter Support SNMP  
                                               IDM STM1/GE converter is convergent EOS equipment support GFP packaging. Can achieve up to 63 EOS signals to GE/FE convergence. The basic function of IDM STM1/GE: Shunt Ethernet frames from GE port (use Ethernet frames MAC, WLAN TAG etc), And then the Ethernet frame encapsulation of different flow into a GFP frames (Formation of EoS signal), Then map the GFP frame into different VCG (each VCG include 1-63 channels VC-12). Reverse is a STM 1 signals the VC12 solution mapping, VCG solutions for mapping out the Ethernet data, and then converge at GE, add different markup to different VCG flow which from GE port. IDM STM 1 / GE generally used for office end, realize the aggregation function, Can network with EoS on the remote side, the realization of using TDM network of Ethernet data remote transmission.   Feature 1.    Provide 2STM1 interface, work on SDH looped network, chain network, 1 + 1 channel protected mode 2.    Provide 1 optical 1 electrical GE interface and 2*100M Ethernet interface. Full duplex/half duplex, adaptive, Flow Control, MDI/MDIX. 3.    SDH clock support master clock and from the clock mode, from the clock mode, support automatic switch of the clock source. 4.    Support ITU-T  standard VACT, LCAS, GFP: (1)    VACT meet ITU-T G.7043 standard, With the method of bytes inserted between the transfer from Ethernet frames to VCG. (2)    LCAS meet ITU-T G.7042 standard, Support automatic identification VC12 link line sequence, Support VC12 link automatically build chain, remove chain. (3)    GFP meet ITU-T G.7041 and G. 8040 standard. Support GFP frame of FCS configuration.   5.    According to the VLAN configuration converge data from the remote device in accordance with the VLAN ID into the corresponding GE/FE ports, The data from remote site equipment should have TAG message, between remote site equipment LAN ID can’t repeat. 6 .    Support Ethernet switch and managerment function. (1)   Support the panel exchange port link aggregation (2)   Support exchange port image management (3)   Support the exchange of export and entry port bandwidth limitations (4)   Support the MAC address table management, 8 k address table depth (5)   Support the exchange of port storm inhibition function (6)   Support QOS function (7)   Max frames support 2048 bytes   7.    Support STM1 and GE port ALS function 8.    Support rich fault diagnosis function: VCG loopback detection function, Exchange port loopback detection function. 9.    Provide console and SNMP network managerment interface. Support software online upgrade, easy to maintain 10.  Support rich network management functions: Configuration management, topology management, resource management, alarm management, performance management, system management, security management, maintenance management functions. 11.  Use standard 19 inch 1 u case, double power supply redundancy design.   Application   Poduct model:  

Type	Describe
IDM STM1 Electrical port bridge	Provide one or two Electrical port to 4FE(Physical isolation) for exchanging, STM1 electrical port is SMC Micro coaxial head, Ethernet Interface is RJ45, power supply is 220V AC/-48 DC
IDM STM1 Optical port bridge	Provide one or two Optical port to 4FE(Physical isolation) for exchanging, STM1 electrical port is SMC Micro coaxial head, Ethernet Interface is RJ45, power supply is 220V AC/-48 DC
IDM STM1 GE bridge	Provide 1000M Ethernet transmission on STM-1 channels, provide 2 groups STM-1 interface, include optical or electrical interface, GE interface is one optical interface and electrical interface
IDM STM1 Photoelectric converter	Provide one group SDH STM-1 electrical port and optical port converter, power supply is 220V AC/-48V DC, electrical port is SMC Micro coaxial head, optical port is ST or SC

  About our raytrans:       Production centre can offer you the Best production quanlity      Test centre ensure every product work well     Storage centre send you product in timeAbout our Exhibition     Certified: