Foot Operating Clinching Machine

FOOT OPERATING CLINCING MACHINE:
1. Equipment introduction
This equipment uses the compressed-air drive, has the energy consumption to be low, the noise small, haven't the pollution, to have the soft arriving function;
The equipment needs the clean and dry compressed-air drive, air pressure 3-6bar; The equipment overall is green.
2. Design manufacture basis:
According to the technical agreement and the photo of the machine that the supply and customer confirmed each other.
3. Equipment main compose and technical data
1, EEC08 air-hydraulic more force cylinder no riveting machine
1.1 Air-hydraulic more force cylinder 1SET
BS08-100-1
Air-hydraulic Intensifying Jar Type: BS08-100-10
Total travel: 100mm
Reinforcement: 10mm
When 6bar air pressure, enters traveling schedule strength: 350Kg
When 6bar air pressure, return travel strength: 370Kg
Max. Pressure under 6bar of air pressure: 76KN
Control system: STE-01-F-08
Including the more force cross-over valve (external)
Including the more force traveling schedule speed regulating valve "X" the valve Air control connection G1/2
Air supply:
After filtration dry compressed air, otherwise it will reduce the useful life of the equipment!
Working air pressure: Please see the Maintenance and Repairing Rules about the best working pressure.
Max. Air pressure: 6bar
Min. Air pressure: 3bar
Environment temperature: -5° C-40° C
Height above sea level: No more than 1200m
Relative humidity: No more than 85%
1.2 Control system 1set
STE-01-F-08
The foot switch starts the electric control system (pneumatic element to use import brand) Start the foot switch.
Under the active status, the operator put in the components locate in the mold, steps on the foot switch starting outfit, Was mad that the fluid increases the strength cylinder to enter the traveling schedule work quickly, the top die fast small strength arriving contact work piece, does not have the impact, does not have the noise, On the mold contact work piece, was mad that the fluid increases the strength cylinder automatic switching for the strength traveling schedule, increases the strength traveling schedule to start to work to produces The riveted joint, (refers to corresponding pressure relay until the hypothesis pressure to achieve setting value), expression product riveted joint Qualified, then the pressure switch movement, controls the top die return trip. If the pressure switch cannot achieve the setting value, Shows the riveting to press the quality not to be unqualified, then the top die cannot the automatic return trip, this time probably press the emergency brake button, The compulsion equipment return trip, may remind the operators from this to inspect the reason, thus the guarantee riveted joint quality is qualified.
The system maintenance installment (was mad that source processor trigeminy) carries on the moisture to the input dry compressed air to divide once more To, the oil atomization, and carries on steeples to the input barometric pressure adjustable, thus realizes the ramming strength not to have in the prescribed limit Level adjustable. The system brings five counters.
1.3 Ramming equipment organism 1 set
EEC08 standard
Uses the whole high quality cast steel structure
Guarantees organism rigidity and the intensity
1.4 No riveting connection mould 1set/size
0.5+0.5mm, 0.8+0.8mm, 1.0+1.0mm (3 sets for free)
The customer needs to provide the sample of work piece or the material, and then we can supply the mould according to your requirement. If you can not supply the material, we will supply the mould according to our normal equipment.
Remark: The voltage can make according to your requirement