Fiberglass FRP GRP tee Flange reducing

FRP Pipe/FRP Tank/Filament Winding Machine/Electrolytic Cell/FRP GratingMachine/FRP Pultrusion Machine

In order to satisfy the different types of joint for pipes/pipelines, we produce different kinds of contact molded FRP fiberglass fittings, like flanges, FRP elbow, FRP reducer, FRP blind flange, FRP spectacle flange, FRP butterfly valve, FRP end cap, FRP slip-on flange etc and non-standard FRP parts.
    It consists of inner surface layer, secondary inner surface layer, structural layer and outer surface layer, we will perform gel test under the condition of local weather, to determine the proportion of resin, curing agent and accelerator.

1. Inner surface layer, it is corrosion-resist layer, and composed of gel coat and surface mat, the content of resin is more than 90%, the thickness is 0.5mm.
2. Secondary inner surface layer, it is leakage-proof layer, adopts E-glass chopped mat and resin, the content of the resin is 70%-75%. The thickness isn't less than 2.1mm, this layer can efficiently prevent the extension of fine cracks on inner surface. So it plays a role of double protection.
3. Structural layer, this layer reinforces the inner surface layer and secondary inner surface layer, resisting the external load and guarantee rigidity and strength. It adopts the combination of E-glass fiber and woven glass fabric, the content of the resin is 50±5%. The thickness depends on the calculation of the specific condition.
4. Outer surface layer, it is ageing resistant layer. The resin be adopted which includes ultraviolet absorbent, so it can efficiently prevent ageing under the ultraviolet radiation outdoors. The thickness is 0.5mm.