Experience Manufacturer for AL/ CU , PVC Insulated Power Cable with IEC 60502 Standard

YOU MAYBE ALSO INTERESTED ABOUT:   0.6/1kV AL/XLPE/PVC(or PE) Power Cable 0.6/1kV CU/XLPE/PVC(or PE) Power Cable 0.6/1kV CU/XLPE/SWA/PVC(or PE) Power Cable 0.6/1kV CU/XLPE/STA/PVC(or PE) Power Cable 0.6/1kV AL/PVC/ PVC (or PE) Power Cable 0.6/1kV CU/PVC/PVC (or PE) Power Cable 0.6/1kV CU/PVC/SWA/PVC(or PE) Power Cable  0.6/1kV AL/PVC/SWA/PVC(or PE) Power Cable 0.6/1kV AL/PVC/STA/PVC(or PE) Power Cable 0.6/1kV CU/PVC/STA/PVC(or PE) Power Cable     Why Choose us?    For over 20 years, Zhengzhou Jinyuan Wire and Cable Co., Ltd., as a professional cable manufacturer has been producing customized cable for a wide range of applications based on high quality, excellent service and competitive market prices. This is an elite team with experienced personnel and strong technical support. Our achievements benefit by having access to the largest market for cheap labor and abundant resources in China and our determination to exceed our clients’ expectations.   PRODUCTS & STANDARDS We can produce more than 2,000 types of cables and wires, such as Bare Conductor: AAC, AAAC, ACSR, ACSR/AW, ACAR, ACSS, ACSS/AW, Aluminum Clad Steel Wire/Strand, Bare Copper Conductors, Copper Clad Steel Wire/Strand, Copper Clad Aluminum(CCA), Galvanized Steel Wire/Strand, etc. Overhead Insulated Cable: Covered Line Single Core Cable and Aerial Bundled Cable (ABC). ABC includes Duplex, Triplex, Quadruplex and more Cores Service Drop Cable. PVC Insulated Wire up to 450/750V PVC or XLPE Insulated Power Cable from 1kV to 36kV Control Cable Welding Cable Rubber Cable We can produce cables according to the standards of IEC, ASTM, EN (BS, DIN, NF, etc.), AS/NZ and meet customers’ special requirements.   ACHIEVEMENTS & COMMITMENT Our cable has been exported to South-East Asia, South Asia, Middle-East, Europe, North and South America, Africa, Australia & New Zealand and so on. Zhengzhou Jinyuan Wire and Cable Co., Ltd.’s commitment is to be recognized as a zero-defect world class manufacturer in cable industry through continuous improvement of our quality, processes, and products, and by our determination to exceed our clients’ expectations.    0.6/1kV COPPER SWA POWER CABLE 0.6/1kV CU/PVC/SWA/PVC(or PE) Power Cable   1. Description   2. Operating Characteristics Rated voltage: 0.6/1(1.2)kV  Max. permissible continuous operating temperature of conductor: 70 °C  Max. temperature of conductor during short-circuit (5s max. duration) shall not exceed:  Nominal cross section of conductor ≤300mm2: 160 °C  Nominal cross section of conductor >300mm2: 140 °C  The ambient temperature under installation should not be lower than: 0 °C The bending radius of cable is recommended as following: For single core cable: not less than 15 times of the diameter of cable  For multi-core cable: not less than 12 times of the diameter of cable  When the armored single core cable used for Alternative Current(AC) system, the armoring material should be non- magnetic.   3. Application The cable is used for fixed installations such as electric power distribution networks or industrial installations, which is laid in high fall area, able to bear external mechanical force, and certain pulling force.   4. Manufacturing Standards IEC 60502-1 & Chinese national standard GB/T 12706-2008  We can produce above cables according to popular international standards such as ASTM,BS,DIN,NF &AS/NZ also.    5. Technical data 5.1 Main technical data of 0.6/1KV, Single core, Copper conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables CABLE CONSTRUCTION 0.6/1KV CU/PVC/SWA/PVC or PE   5.2 Main technical data of 0.6/1KV, two cores, Copper conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables CABLE CONSTRUCTION 0.6/1KV CU/PVC/SWA/PVC or PE   5.3 Main technical data of 0.6/1KV, three cores, Copper conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables CABLE CONSTRUCTION 0.6/1KV CU/PVC/SWA/PVC or PE   5.4 Main technical data of 0.6/1KV, four cores, Copper conductor, PVC insulated, galvanized steel wire armored and PVC or PE sheath cables CABLE CONSTRUCTION 0.6/1KV CU/PVC/SWA/PVC or PE              FAQ (1)Q: Is your company a factory or trading company? A: We are factory with our own trading company. Our trade business expands home and abroad. (2)Q: What is Minimum Order Quantity? A: Generally, 1000 meters for building wire. For power cable, armored or unarmored, 500 meters. (3)Q: Do you have any certificates? A: We have CE and ISO 9001:2008. And type test report for ACSR, AAC, XLPE insulated power cable. (4)Q: Which standards for your products? A: We can produce wire and cable according to international standards: IEC, ASTM, BS, DIN, SANS, CSA or as customers’ requirement. (5)Q: How about delivery time? A: If we have stock, delivery would be very quick. For the newly-produced products, 15 to 25 days for production. (6)Q: Payment terms: A: Normally 30% paid as prepayment, balance paid before delivery. Or 100% L/C at sight. (7)Q: What is your packing? A: Generally, we have reels for wire, and wooden drums for small size of power cable, steel drums for biggers size cable. We try every means to ensure the good transportation.     Contact Methods