DS3800HSCG1E1F SPEEDTRONIC HI LEVEL ISOLATOR BOARD GE
DS3800HSCG1E1F SPEEDTRONIC HI LEVEL ISOLATOR BOARD GE
DS3800HSCG1E1F SPEEDTRONIC HI LEVEL ISOLATOR BOARD GE

1 / 1

DS3800HSCG1E1F SPEEDTRONIC HI LEVEL ISOLATOR BOARD GE

$1.00 ~ $1.00 / Piece/Pieces
Send Inquiry
Model No. : DS3800HSCG1E1F
Brand Name :
6yrs

Xiamen, Fujian, China

Visit The Store
  • Platform Certification
  • Online Expo

Product description

The GE High Level Isolator Board DS3800HSCG1E1F is designed for quick installation in the drive. The board features a modular connector on 1 end and retention levers on the other end. The GE High Level Isolator Board DS3800HSCG1E1F also is populated with 8 jumpers and 1 trimmer resistor. The board also is populated with 1 34-pin connector with retention levers and 1 programmable interrupt controller.

If the GE High Level Isolator Board DS3800HSCG1E1F is replaced, only a qualified servicer or installer can perform the task. This is because of the high-voltage electricity that enters the drive during normal processing and the knowledge it takes to work safely on the drive. Another concern is the motor and the other moving parts that can injure individuals in the surrounding area.

Before the servicers starts any procedure, the first step is to inspect the area around the drive. The floor must be free of dirt, dust, oil, grease and clutter. If the floor is moist or has puddles of standing water, it must be cleaned because the water is a conductive material and can cause a shock. Use towels to dry any water on the floor. If the moisture is caused by condensation and it is a common occurrence, you might consider installing dehumidifiers to dry the air. This would help eliminate the wet floors. Oil and grease must also be removed by using degreasing agents or a detergent. Once the oil and grease are removed, allow the floor to dry. Extension cords without a ground wire are also a hazard. Remove them from the area or replace them with 3-wire extension cords.

General Electric DS3800HSCG1E1F SPEEDTRONIC HI LEVEL ISOLATOR BOARD GE Programmable PLC General Electric Water Pump General Ac Electrical General Electric Contactor.



Ds3800hscg1e1f

IC670GBI002 The GE Field Control IC670GBI002 is a bus interface unit. The GE Field Control IC670GBI002 support hot insertion/removal of I/O modules whose catalog number...  
IC670GBI102 GE Field Control IC670GBI102 is a 115VAC/125VDC bus interface unit. GE Field Control IC670GBI102 support hot insertion/removal of I/O modules whose catalog...  
IC670MDL233 The 120VAC Isolated Input Module GE Field Control IC670MDL233 provides 8 isolated discrete inputs. Intelligent processing for the GE Field Control IC670MDL233...  
IC670MDL240 The GE Field Control IC670MDL240 module receives power from the bus interface unit for its own operation. Intelligent processing for GE Field Control...  
IC670MDL241 The 240VAC Input Module GE Field Control IC670MDL241 provides two isolated groups of 8 discrete inputs each. A network of resistors and capacitors establishes...  
IC670MDL330 GE Field Control IC670MDL330 12-120 VAC 1.0 amp output module that provides a single group of 16 discrete outputs. The intelligent processing for GE Field...  
IC670MDL331 A GE Field Control IC670MDL331 is a 120 VAC isolated output module. GE Field Control IC670MDL331 provides eight outputs arranged as four groups of 2. Each...  
IC670MDL640 The GE Field Control IC670MDL640 24 VDC positive/negative input module provides a single group of 16 discrete inputs. Each input on the GE Field Control...  
IC670MDL641 The 48 VDC Positive/Negative Input Module GE Field Control IC670MDL641 provides a single group of 16 discrete inputs, which may be driven by positive or...  
IC670MDL642 The 125 VDC Positive/Negative Input Module GE Field Control IC670MDL642 provides a single group of 16 discrete inputs, which may be driven by positive or...  
IC670MDL643 GE Field Control IC670MDL643 e 5/12 VDC Positive/Negative Input Module. GE Field Control IC670MDL643  provides 16 discrete inputs arranged in 2 groups of...  
IC670MDL644 The 24 VDC positive/negative fast input module GE Field Control IC670MDL644 provides a single group of 16 discrete inputs, which may be driven by positive or...  
IC670MDL730 Providing a single group of 8 discrete outputs the GE Field Control IC670MDL730 is a 24 VDC electronic short-circuit protection output module. Each point on...  
IC670MDL740 A GE Field Control IC670MDL740 12/24 VDC positive output module that provides a single group of 16 discrete outputs. The outputs on the GE Field Control...  




Send Inquiry

Product Alert

Subscribe to your interested keywords. We will send freely the latest and hottest products to your Inbox. Don't miss any trade information.

版权所有 © 宁波全贸信息技术有限公司 浙ICP备12012821号-1 浙B2-20200628