Jiangxi Shicheng Mine Machinery Factory washer scrubber for tin mining plant Applications 1. we design it to break up alluvial gravels, clays and sand
2.it normaly use as mineral wash plant, like placer / alluvial / river gold, chromite / chrome, tin, coltan, diamond, tantalum, niobium, phosphorus ore 3.It can input feeding size up to 230mm tin mining plant washer scrubber / alluvial tin wash plant 1. High capacity and high power scrubbing 2. The long drum of the scrubber retains material for longer, more vigorous washing for complete separation 3. One high output electrical motor driving a gear system providing efficient torque 4. Adjustable rotary speed 5. The water with high pressure flushed the inwall of drum 6. Can accept material up to 230mm 7. Mechanical sealing of inlet chute – minimal spillage when over feeding 8. Drive loads absorbed within the drive frame and pivoting drive frame design – Foundations only have to support vertical load and are not critical for alignment ie minimal cost 9. Shell design less mass than conventional roller supported units – installation craneage requirement reduced tin mining plant washer scrubber / alluvial tin wash plant Working Principle A: The rotary mining scrubber is an autogenously rotating drum scrubber, utilising pebbles and rocks within the feed source to fracture and disintegrate clays, agglomerates and soft oxides. B: Disintegrated material is homogeneously slurried within the drum, whilst the autogenous load is retained within the drum by reverse flights located at the drum discharge end. C: Slurry and washed oversize overflows the drum discharge throat to the concentric exit trommels. Below please find the technical specifications of our rotary drum scrubber for tin wash plant
Model | Screen size (mm) | Rotation speed (r/min) | Feeding size (mm) | Angle of inclination (°) | Capacity (T/h) | Power (Kw) |
400 | ≤20 | 27.9 | ≤80 | ≤10 | 10 | 3 |
600 | ≤25 | 27.6 | ≤80 | ≤10 | 20 | 5 |
750 | ≤25 | 27.6 | ≤100 | ≤10 | 30 | 7.5 |
900 | ≤25 | 27.6 | ≤100 | ≤10 | 40 | 11 |
1200 | ≤25 | 17 | ≤160 | ≤10 | 50- | 15 |
1500 | ≤50 | 16 | ≤230 | ≤10 | 70-100 | 30 |
1800 | ≤50 | 16 | ≤230 | ≤10 | 120-150 | 37 |
2100 | ≤50 | 16 | ≤230 | ≤10 | 150-180 | 45 |
2400 | ≤50 | 16 | ≤230 | ≤10 | 180-250 | 66 |
2700 | ≤50 | 16 | ≤230 | ≤10 | 250-300 | 88 |
3000 | ≤50 | 16 | ≤230 | ≤10 | 300-400 | 150 |
Please Note : you can choose the suitable model according to your capacity and feeding size. the screen size and material can produced for your request. please find following are some further detail pictures of tin washer scrubber.
Screen material can made as your need or we will give you suggestion based on your mining conditions.
If you are interested in our products or need further information. please don't hestiate to contact me.