Product description
Surface plating: Sn/Pb
Finish: HAL, tin-plated, immersion Ni/Au, and OSP
Hole wall copper thickness: 25um
Min. line width and space: 0.15mm
Min. hole diameter: 0.3mm
Layout tolerance (routing): +/- 0.1mm
Layout: 2 x 2 pieces in a panel
V-cut angle: 30 degrees
Craft ability table
- Max. board size: 560 x 610mm
- Min. and max. board thickness: 0.4 and 3.2mm
- Min. finish hole size: 0.20mm
- Max. aspect ratio: 8:1
- Min. line width and pitch: 0.10mm
- Min. SMT device pitch and width: 0.30 and 0.254mm
- Board flatness tolerance: 0.5 - 1%
- Layout tolerance: +/-0.1mm
- V-cut angle: 20 - 60 degrees
Max. board size: 560 x 610mm
Min. and max. board thickness: 0.4 and 3.2mm
Min. finish hole size: 0.20mm
Max. aspect ratio: 8:1
Min. line width and pitch: 0.10mm
Min. SMT device pitch and width: 0.30 and 0.254mm
Board flatness tolerance: 0.5 - 1%
Layout tolerance: +/-0.1mm
V-cut angle: 20 - 60 degrees