Disposable Surgical Mask Making Machine

Disposable Surgical Mask Making Machine

Turn on the power switch of the ultrasonic generator, and press the "Sound Wave Test" switch. If the indicator of the amplitude display rises sharply and exceeds 100, it means that the frequency is too far from the resonance point, and the "Sound Wave Adjustment" knob must be adjusted. Visually look at the amplitude display, press the "Sound Wave Test" check switch with the left hand (no more than 3 seconds), turn the "Sound Wave Adjustment" knob with the right hand, and adjust the pointer of the amplitude display to the lowest point. When adjusting, if the indicator of the amplitude display is not falling, but rising, turn the "Sound Wave Adjustment" knob in the opposite direction. The reading of the amplitude display indicator is within 50, and the reading of the ammeter indicator is below 0.6A is the best working state. After adjusting the sound wave, tighten the wing nut and close the protective cover.

Our products also include a Mask Blank Machines, which mainly uses the principles of ultrasonic cutting and automatic welding and edge sealing to complete the special-shaped cutting and welding of slices; and an Ear-loop Flat Mask Machines, which is based on the welding method and use method of the ear strap. It is an indispensable part of the plane mask; there is also the Head-loop Flat Mask Machines, which is used for the automatic production of multi-layer material plane masks; and the Tie-on Flat Mask Machines, which is an efficient flat mask strap welding machine. equipment; there is also a High Speed Flat Mask Machines, which is a machine used for the automatic production of multi-layer material plane masks. If you want to know more, welcome to consult us, we will serve you wholeheartedly!

Key Specifications