Deep Well Pump Motor Stator Coil Forming Machine

Deep Well Pump Motor Stator Coil Forming Machine

Application

The stator coil forming machine is suitable for big power, big dimension, heavy weight, long stack length stators.

Main technical data

Stator OD	≤300mm
Stator ID	≤200mm
Stack Height	≤400mm
Height of Coil	≤70mm
Pitch time	≤30s/pc
Displacement of Cylinder	50L/min
Power supply	380V   50/60Hz 4Kw
Weight	≈2500Kg
Dimension	(L)4400×(W)1850×(H)1350mm

Information needed for forming machine inquiry
It will be better if customer could send us detailed drawing including below information.
1. Stator lamination drawing
2. Stator stack drawing
3. Stato winding drawing
4.Required productivity
5. Other technical requirement
If possible, it will be better if customer can send us samples. 

Competitive advantages

Variety of application, easy operation.

We have Overseas Service Center.

The stator coil forming machine is suitable for rotor or stator with different model number and dimension.

The operation and tooling change process is easy.

We could customize machine for our customer as per their requirement.

We directly supply our machines to many countries, like USA, France, Turkey, Iran, India, Brazil, Argentina, Mexico etc.
This machine is controlled by PLC. All the parameter could be set on the touch screen,

Appropriate use
If coil dimension and appearance is inaccurate, stop to do adjustment to avoid of quality accident.
Check and clean up the electrical cabinet once every three months.
The machine should be stopped or power should be off when the operator is away or do clean and lubricating job.
Do not remove the safety protection device in the process of using.
The dress of operator should meet the safety requirements, stand in proper position.
Regularly clean the lubricating tooling and lubricating system. Do not keep the safety door and oil eye lid to avoid of that foreign matter like dust,metal scrap get in.
Do not operate machine during its maintenance, stop running machine and cut off the power.
That other than specified personnel do not operate the machine, and two people operate the machine at the same time is forbidden.
It is prohibited that operate machine and touch the electrical parts by wet hands, probably may cause electric shock.
The operator can not leave away when the machine is running, should keep his eyes on that if any abnormality (abnormal noise, unusual smell, over heat, vibration) of each parts coming up. Stop and check the machine immediately if any of above mentioned takes place, and solve it in time.
It is prohibited that to use the machine beyond its capacity and load.
After stop using the machine, please do the check an clean up, please do not use the steam or water or corrosive liquid to clean the machine.
The height of the hydraulic oil in the oil tank should keep in same level with the mark line; the hydraulic oil no is J-HM46# antiwar hydraulic oil.