1 / 2
Model No. : | Drip Pipe |
---|---|
Brand Name : | BOYA |
Color : | Black Or White |
Product description
HDPE/UPVC Permeable corrugated pipe
Perforated pipe is used in land drainage applications ,By its name perforated pipe has perforations along the pipe. This allows water to enter the pipe through these perforated holes. They are thus suitable for sub soil drainage systems. Ideally suited to applications such as Field Drain or French Drains.
Perforated Pipe for the reliable drainage of highways, streets,airports,sports grounds, track systems and irrigation systems, in all cases with higher demands for drainage pipes.
Application:
Widely used in highway, railway engineering, waste landfill, tunnel, subway, green belts, sports ground and water content on the high side slope protection caused by such drainage areas, and agriculture, horticulture underground irrigation and drainage systems.It has become the three main products in China's civil engineering construction (seepage and drainage) with soft water permeable pipe and plastic blind ditch.
Adopts wave structure, reduce the weight of pipe, at the same time, improve the stiffness of the tube, and have high hoop stiffness/weight ratio;
The product is lighting flexible, has low friction coefficient, easy to Installation laid and transportation.
Delivery length is convenient to costumed.
Has high physical and mechanical property, high pressure, impact resistance, heat resistance, and corrosion resistance.
HDPE/UPVC Perforated Corrugated Drainage Pipe Specifications:
Diameter mm |
SG50 |
SG63 |
SG75 |
SG80 |
SG110 |
SG116 |
SG160 |
SG200 |
SG225 |
Colour |
White/black |
||||||||
structure type |
Single Wall |
Singles wall |
Single wall |
single /double wall |
Single/double wall |
Single/double wall |
double wall |
double wall |
double wall |
Outer diameter |
50 |
63 |
75 |
80 |
110 |
116 |
160 |
220 |
245 |
Inner diameter |
41 |
55 |
67 |
80 |
93 |
100 |
143 |
200 |
225 |
Feed water area cm2/m |
24 |
24 |
24 |
24 |
80 |
80 |
80 |
80 |
80 |
Local punched Feed water area cm2/m |
15 |
15 |
15 |
15 |
15 |
15 |
15 |
15 |
15 |
Length |
50.100m/ coil |
30m/ coil 6m/ pcs |
6m/ pcs |
6m/pcs |
6m/pcs |
6m/pcs |
|||
HS |
HS:3917320000 |
NOTE: Special requirements can be customized.
The main technical indexes:
Vertical condensation to 40% of the outer diameter, immediately unloading, sample is not rupture or layered
temperature At 0 ℃, the height of 1 M conditions, for 1 Kg weight hammer, impact 10 times, should be OK more than nine times;
uniform and smooth inner-wall ,through hole located lower than 1/2 of The height of the troughs, the number of through hole which higher than 1/2 of The height of the troughs is less than 10% of the total;
permeable area ≥15cm2/M ;
longitudinal retraction rate ≤3.0%;
bending degree %≤2;
ring stiffness≥4KN/㎡ .6.3KN/㎡.8KN/㎡
Send your inquiry to this supplier