1 / 6
Model No. : | WER-ES2502I |
---|---|
Brand Name : | WER |
Product description
Model | WER-ES2502I | |
Print Technology | Drop-On-Demand Piezo electric Technology | |
Nozzles | 2*1440 & 4* 4 color ( CM Y K ) | |
Ink type | Piezo Eco solvent ink | |
Ink supplying system | Auto sense ink supplying system | |
Intelligent monitoring system | auto detecting system while lacking ink | |
Media accetpable | Flex Banner, mesh, PVC vinyl, eco solvent based photo paper, PP paper, backlit film ,wall-paper, etc. | |
Print width max | 2500 MM | |
Speed | Mass production mode | 34m2/h (360*1440dpi, 4pass) |
Quality mode | 20m2/h (720*1080dpi, 6pass) | |
Ultra quality mode | 15m2/h (720*1440dpi, 8pass) | |
Print-head cleaning system | Automatic cleaning & auto capping system | |
Interface | USB 2.0 | |
RIP Software | Ultraprint Maintop, Photoprint | |
Power supply | Ac220V 50/60Hz | |
Working environment | Temperature: 20 °C ~ 32 °C; Humidity: 40 % ~ 60 % | |
N.W. | 400 KGS | |
G.W. | 450 KGS | |
Machine dimension | 3550 mm * 800 mm * 1250 mm | |
Packing dimension | 3850 mm * 900 mm * 1550 mm |
DX5 Printhead | |
Instruction: Epson DX5 Resolution: 1440DPI | |
Color: 4 colors | |
Print mode: 4, 6, 8, 12 Pass | |
Notes: | |
A: Operators need to make antistatic treatment, please wear the Anti-static devices if permission, to prevent the high static load from burning the circuit board inside print head. | |
B: During installation, try not to directly touch the surface of print head. |
Eco solvent printer main board | |
Introduction: EPSON DX5 and DX7 eco solvent printer main board. | |
Usage: Send printing data signal, control the operations of main parts. | |
Notes: | |
A: Resist dirt and moisture for the main board. | |
B: Turn off the power when check the main board. Mark the plug signal line and supply line to avoid connection mistake which can burnout the main board. | |
C: Please do not break or weld the spare parts on the main board personally. |
Eco solvent printer print head board | |
Introduction: | |
EPSON DX5 and DX7 eco solvent printer print head board. | |
Usage: Receive printing data signal and control inkjet and voltage of the print head. | |
Notes: | |
A:Resist dirt and moisture for the print head board. | |
B: The print head cable must be inserted into the right place; otherwise it may burnout the print head. | |
C: Please do not weld or dismount any spare part on the print head board personally. |
Sheet feeder | |
Introduction: Auto-feed, keep the material tension balance, make the material pass through the print platform smoothly and do nice printing work. | |
Notes: | |
A:. When printing materials, rigidly fix the material and sheet feeder shelf. | |
B: Try to put the material in middle of the platform, make the material get equal force by the roller, so it can pass through the print platform smoothly. | |
C:Keep a clean and tidy environment surrounding the sheet feeder; do not interfere with the feeding process. |
Ink cartridge | |
Introduction: 2 Liter ink cartridge, provide the ink continuously which is very convenient. Ink color is clear, so it is not easy to add the wrong color ink. | |
Notes: | |
A: Make sure each color ink to the corresponding ink cartridge. | |
B: It is enough when the ink reaches 3/4 of the cartridge. | |
C: Be careful not to dirty machine and ground when add ink; seal the lid on time after add ink. |
Suction and heating device | |
Introduction: Automatic suction when printing which can make the print materials adsorb to the platform better, so the heater can heat and dry the printed material more evenly. | |
Notes: | |
A: Keep the suction plate clean and tidy. | |
B: Adjust the suction strength before printing, as well as proper heating temperature. | |
C: Do not touch the heating plate when printing. |
Send your inquiry to this supplier