CE RoHS IP67 LPV-60-5 60W 5v 12a constant voltage led driver with 2 years warranty

CE RoHS IP67 LPV-60-5 60w 5v 12A Constant voltage led driver with 2 years warranty     Product Description   * we have models LPV-60-12 (12V 5A),  LPV-60-24(24V 2.5A),   LPV-60-36(36V 1.7A) ,LPV-60-48 (48V 1.3A) about single output LPV-60w waterproof led power supply * we are manufacturer specialized in making switching power supplies.so if you want these models or any other kinds of power supply models ,we can make them for you . * With CE and ROSH certificate ,so you can trust our quality and servece .And the price is competitive.     Specifications   60W AC DC waterproof LED power supply   1. Globally applicable AC input power   2. Low-cost, high reliability   3. Protections: short circuit/ overload/ over-voltage/ high temperature   4. Coolong by free air convection   5. Small size, light weight   6. 100% full load burn-in test     Technic data  

Model		LPV-60-12	LPV-60-24	LPV-60-36	LPV-60-48
output	DC voltage	12V	24V	36V	48V
	Voltage tolerance	±1%	±1%	±1%	±1%
	Rated current	5A	2.5A	1.7A	1.3A
	Current range	0~5A	0~2.5A	0~1.7A	0~1.3A
	Rated power	60W	60W	61.2W	62.4W
	Ripple&noise	100mvp-p	150mvp-p	180mvp-p	180mvp-p
input	Voltage range	90~264VAC,126~373VDC
	Frequency	47~63HZ
	AC current	1.6A/115VAC, 0.8A/230VAC
	Efficiency	82%	84%	84%	85%
	Inrush current	Cold start current 18A/115VAC, 36A/230VAC
	Leakage current	<1mA/240VAC
protection	Over load	Rated output power 115%~135%start over load protection
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Over voltage	15.6~17.8V	30.6~33.2V	42.6~44.2V	54.8~56.6V
		Protection type: hiccup mode,auto-recovery after fault condition is removed
	Over temperature	Shell temp≥85°C,start over temperature protection
		Protection mode: cutoff output,auto-recovery after temperature become normal
environment	Working temp,humidity	-10°C~+60°C,20%~90%RH
	Storage temp.humidity	-20°C~+85°C,10%~95%RH non condensing
	Withstand vibration	10~500HZ,2G 10min/1cycle,period for 60minutes,each axes
safety	Withstand voltage	I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
	Isolated resistance	I/P-O/P,I/P-FG,O/P-FG: 100M ohms/500VDC
Fits tandard	Safety standard	Fit UL1012,IP67 protect level
	EMC standard	Fit EN55022,CLASSA
Others	Dimension	190*49*34mm (L*W*H)
	Weight/packing	0.55kg/30pcs/17.5kg/0.025 m³/0.87CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation.

    Certifications     Packaging & Shipping     FAQ How to choose our power supply?                                                                                                       
  1. Single output To determine the power after the output voltage is decided. The power range of our switching power supply is 10W to 1500W, output voltage from 3V to 220V DC. If the requirement is 24V, 1A, we can choose S-25-24, and within cost range, retain 10% -20% of the power allowance.   2. Multi-output The multi-output power supply has the main and secondary circuit output. The character of main circuit output is better than the secondary.To ensure the load regulation and so on, every circuit has to be with a certain load. If just using the second circuit, the main circuit has to be matched with corresponding dummy load (more than 0.5A or larger)   3. Before placing an order, please kindly confirm us the details below: Input voltage, Output voltage, Output current, Power,waterproof or not, special size or not, and other special requests.
  4. When purchasing the power supply, the customer should know the operation environment, for example, temperature, humidity, altitude, etc.    How to use our power supply?                                                                                                                       
1. Before using the power supply, make sure whether the input voltage specification is in accordance with the input voltage nominal value of the power supply to use. Generally, the switches are located at220V, please note that when using. 2. Wiring in strict accordance with the drawings. 3. Please note whether the input line and output could meet the power requirement. 4. Waterproof issue of switching power supply In general, the base plate switch power supply is not waterproof. If the power supply is installed outdoors, please equip it with waterproof case.
  How to installation our power supply?                                                                                                   
  Please use the proper screw to fix the power supply in the applicable environment, the screw length should be less than 6mm, cannot reach to the circuit boards, to avoid touching the internal components and conductive dangerous. There should be ventilation channels or exhaust devices in the power supply working space. In order to ensure the use security and avoid reduce the interference; please make sure that earth the ground wire well. The ground wire is large than AWG#. After installation, please measure the insulation resistance of shell between input and output, to avoid electric shock.   Questions for our power supply?                                                                                                                
  1. When using your power supply, find the shell with voltage, is that normal? Answer: That is normal. According to the EMI request, the input port and the shell are connected by a capacitor, which causes the voltage on the shell. It’s specified in the IEC standard that the leakage current is less than 3.5mA. It’s safe and won't cause any damage to people.   2. When needing 24V voltage, but only 12V power supply at hand, can this work to connect 2 pieces 12W power supply in series? Answer: It’s workable. We can cut down the cost through that way sometimes.   3. Can use S-50W power supply as the charging power supply?  Answer: Yes. But in order to avoid battery feedback, please be advised use a series diode on the output, and pay attention to the diode heat dissipation.   4. Why the power supply fails to boot correctly?  Answer: When the load is electric, light bulbs or capacitive load, the instantaneous electric current is excessive when booting, it can cause overload protection. In this case, please choose the appropriate power or contact the manufacture factory.   Company Information       Send your Inquiry Details in the Below, Click "Send" Now!