1 / 1
Model No. : | CD1 MD1 |
---|
Product description
Detailed Product Description
electric wire rope hoist,the capacity is from 0.5Tons to 32Tons,the lifting height is from 6 meters to 100 meters more.
Electric wire rope hoists CD1,MD1 can be widely used to hoist heavy objects.or installed on the straight or curve I-steel beam of single-girder cranes,they can also be used toghter with Electric Hoist Double-girder,gantry crane and slewing cranes.
Lifting Capicaty(T) |
0.5 |
1 |
2 |
3.2 |
5 |
10 |
||||||||||||||||||||||||||||||
Lifting height(M) |
6 |
9 |
12 |
18 |
6 |
9 |
12 |
18 |
24 |
30 |
6 |
9 |
12 |
18 |
24 |
30 |
6 |
9 |
12 |
18 |
24 |
30 |
6 |
9 |
12 |
18 |
24 |
30 |
9 |
12 |
18 |
24 |
30 |
|||
Lifting speed(M/min) |
8 |
7 |
||||||||||||||||||||||||||||||||||
Travelling speed(M/min) |
20 |
|||||||||||||||||||||||||||||||||||
Power supply(V;Hz) |
380V;50HZ;3 Phase |
|||||||||||||||||||||||||||||||||||
Number of switching(n/hr) |
120 |
|||||||||||||||||||||||||||||||||||
Wire rope |
specification |
5.1-6x19+ NF-1770-ZS |
7.4-6x37+ |
11-6x37+ |
13-6x37+NF- |
15-6x37+NF |
||||||||||||||||||||||||||||||
Structure |
Strand 1+6+12 |
Strand 1+6+12+18 |
||||||||||||||||||||||||||||||||||
Rail |
I—beam |
16-28b |
20-32c |
20a-45c |
28a-63c |
|||||||||||||||||||||||||||||||
Mator |
Main hoisting |
Power |
0.8 |
1.5 |
3.0 |
4.5 |
7.5 |
13 |
||||||||||||||||||||||||||||
Speed |
1380 |
1380 |
1380 |
1380 |
1400 |
1400 |
||||||||||||||||||||||||||||||
Auxiliary hoisting |
Power |
0.2 |
0.4 |
0.8 |
0.8 |
1.5 |
||||||||||||||||||||||||||||||
Speed |
1380 |
1380 |
1380 |
1380 |
1380 |
|||||||||||||||||||||||||||||||
Travelling |
Power |
0.2 |
0.4 |
0.8 |
||||||||||||||||||||||||||||||||
Speed |
1380 |
1380 |
1380 |
|||||||||||||||||||||||||||||||||
Motor: Hoist Motor is an taper type rotor motor with braking,it is made by Nanjing special motor factory,it is of the best quality motors, it has bigger torque, so it can be adapted to moving frequently,the Maximum torque is 2.4-3 times than the rated torque.
Gear Box: Hoist Gear Box has specially treated gears for high wear resistance. Each Geared Shaft assembly is supported on ball or roller bearings , to ensure smooth, low-friction operation.
Wire Rope: Hoisting rope comply with the exporting standards. The leading rope taken by the Drum, does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
Rope Drum: Grooved Drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum Shaft resolves on Ball Bearings for ensuring smooth running.
Electric apparatus controlling system: Model CD1 and MD1 is composed of the contactor box,controlling switch,cut-off limiter.the working voltage of controlling switch is 380V,36V(safety voltage).
Rope Guide: Rope Guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of our company is thicken and dilated, so that it is not easy to be damaged.
Hook: The Hook Block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting . All sheaves rotate on ball bearing.The pulley is thicken and dilated than domestic common pulley.
In the meanwhile,our company could produce other kinds of electric wire rope hoists,Such as the capacity is 16T,32T;the lifting height is available from 30meters to 100 meters more;single drum and hook pulley modify double drum and double hook pulley;Even the motor voltage may be modified accoding the client's requirement.
Send your inquiry to this supplier