Specifications 1.Low ordor,high hardness
2Good fluidity and gloss
3.Easy to pot
4.Clear,black,milkwhite
5.Good acid-base resistance
MTB -3301 Two Component Epoxy Resin Glue for Potting Electronics
Product Character It is a two component epoxy resin potting glue With the color of black, clear and milkwhite Low viscosity Good fluidity Easy to penetrate to the products Curing Condition Can cure at room temperature and by heating Room temperature: 6-8H Heat at 60°C:1H Cured product Character No bubbles, good flatness, good gloss, high hardness Cured products with good flame retardant property Good acid-base resistance Good moisture, water, oil, dust resistance Good resistance of humidity and weather aging Usage Mix the glue with the mix ratio of 4:1 by weight Keep the products dry and clean Check the agent A to make sure whether it is settling, and stir it completely Get the glue by weight, and mix them well with the mix ratio of 4:1,then stir well Get the glue you are going to use to avoid to waste the glue If the first time potting is not enough, can start the second time. Keep the working environment clear to avoid the dust into the glue. Package 5KGS/Set, in iron barrel, if you want ,we can do the package as your design.