automotive Nap zapper alert

  Product Description      Driver Fatigue Monitor MR688 Civil Standard Version   Introduction   MR688 civil standard version is more suitable for the single driver, the installation is very simple, you just need to fix it on the dashboard and then plug the power adapter into the cigarette lighter socket, and plug the other end of the cable into host power supply socket. When the MR688 detect driver’s sleepy, it will alarm to wake up the drivers, make the early warning before the accident happened. Besides, If MR688 detects drivers looking around or distraction, it also will alarm to warn the driver to keep the eyes on the road.   Main Feature 1. In-time driver Fatigue alarm.  2. Driver looking around and non-concentrating alarm. 3. Alarm sensitivity and volume setting: By hand. 4. Signal output: No 5. Power Connection: Cigarette lighter power. 6. Accessory: Cigarette lighter power, magnet. 7. Application: Easy and simple   Target Customers 1. Single driver 2. 4S shop 3. Insurance company 4. Car renting company   DIP switch setting 1. Sensitivity setting: Because of the different understanding to the product, peoples’ initial expect of purchasing is to hope the product can be alarmed once their eyes closes. In fact, this may cause some non-sleeping warning, they may complain too much warning after using several time and prefer to make alarm only for real sleepy condition. So we set up 2 levels sensitivity to help customers adjusting conveniently when they use the product. Each level it can quickly detect the real sleepy or absentminded condition, only the alarming time is different for looking around and normal eyes closing.       Please see above pictures, the toggle switch located at the back side of the product, it will be pushed to the OFF position before delivery.      1A: DIP1=OFF(Pull down), for testing sensitivity(high sensitivity, for test use), it takes about 2-3seconds to alarm when detect the driver’s sleepy or distraction. 1B: DIP1=ON(pull up), for normal sensitivity, it takes a little bit more time to make alarming when detect driver’s fatigue or distraction, about 4-5seconds.   2.Volume setting: Everyone has the different requirements about the alarm volume. The volume can be set by adjusting the DIP switches 4(DIP-4)     3A: DIP4=OFF(pull down), high volume. 3B: DIP4=ON(pull up), low volume. Note: For DIP2 and DIP3, it doesn’t have function here, it is suitable for the MR688 commercial professional version(with speed detection module)   Scope of Application    Installation Sit in the normal driving position. If the green light is on or twinkling, indicating that the driver has been detected in opening the eyes. If the green light is still on or flashing when the driver moves a little distance from left to right and down to up, indicating that the installation location is more reasonable. Then you can rest assured a safe driving. Flashing Green light is normal while driver open the eyes, especially for the driver rimmed spectacles. If there is some shielding, the green light will be flashing.     Packaging & Shipping  Delivery     Company Information Company Picture Certification Our driver fatigue monitor MR688 is world patant products, they have passed CE, FCC, ROSH and other certification   Our Services  Samples are available for you at any time. Fast delivery: once we receive your payment, we can ship the samples to you without any delay. Best After-sales service:  Any questions from you after you buy our products, we will do our best to service you. We are always here!   Contact Detail contact person: Linssa Wang Skype: caredrive04 Trade Messager: cn203648008 Whatsapp: 008618565157852 If you have any question, please feel free to contact us! We would try our best to help!