Automotive Flexible Silicone Heat Resistant Tubing

Product Description

Product Item	Automotive Flexible Silicone Heat Resistant Tubing
Material	Silicone rubber + Fabric reinforcement
Temperature range	-40 ~ +250 C
Pressure	0.5~6 bar
ID	8mm ~ 152mm or as request
Reinforcement	Polyester cloth or Aramid cloth
Thickness	4mm, 4.5mm, 5mm or request
Color	Blue, Red, Black or request
Note	Standard silicone hoses are not suitable for use with pressurized oil or fuel.
	We do, however, offer special Fluorosilicone liners for oil resistance.

PASSION FOR HOSE, PASSION FOR YOU.
Detailed Images      Bill of Loading                                                                                                         Customer's Comments
Why they order silicone hoses from us again and again?
Because:
A. Material

Silicone Rubber Material: Wacker from Germany or KCC from South Korea
Shore hardness	70 Shore A
Density	1.25
Tensile Strength	9.4Mpa
Tear Strength	17.5KN/M
Elongation	330%
Compression set	30%

Reinforcement Material: Polyester cloth or Aramid cloth
Composition	100% Kevlar fiber
Weigth for m2	120 g
Tensile Strenght on Warp and Weft	750 N/5CM, 700 N/5CM
Elongation on Warp and Weft	28%, 28%
(note: data may different for different lot material.)

B. THE THICKNESS, THE SURFACE, THE LOGO
The Thickness 4 layers with 4.5mm wall.
3 layers, 5 layers, 6 layers ok too.
4.5mm, 5mm, 8mm available.
The Surface Always, smooth surface
Wrapped surface available too.
The Logo Our logo, PASSION
Print your logo avaibla too.
C. VARIOUS KINDS OF SILICONE HOSES

1) Straight coupler, 76mm, 1000mm, 2000mm.

2) Elbow hose, 30 bend, 45 bend, 60 bend, 90 bend, 135 bend, 180 bend.

3) Straight reducer.

4) Elbow reducing, 45 degree reducing and 90 degree reducing.

5) Bellows hump hose, intercooler CAC hose.

6) T hose

7) Vacuum hose

8) Braided heater hose

D. SPECIAL SERVICE
Low MOQ Size>100 types, MOQ=20pcs
Size>200 types, MOQ=10pcs
Sample + Customzied Hose Free sample, available
Customzied hose according to drawing, available
Delivery time 30~35days for 222ctns.
E. FOLLOWING UP AND INSPECTING
a. Before shipment, photos will be offered. b. If requested, test report can be offered. F. PACKING AND PACKING DETAILS
Print ID (60-45) on the inner tube.
It is easy to pick out this one from thousands ones.
Pack hose with individul pp bag, and stick lable on each bag. Put hoses into carton with a big pp bag inside. Be well packed and shipped by container. Packing details will be sent after shipment. G. FACTORY AND FACILITY
Packing & Delivery Common packing: Be well packed with a plastic bag, then put hoses into carton with a big PP bag.

Loading port: Ningbo or Shanghai port.