Anti distraction car alarm installation prices, magic car alarm, car alarm system manual

Anti distraction car alarm installation prices, magic car alarm, car alarm system manual               Product Description  

Product name:	Driver Fatigue Monitor MR688
Patent:	Worldwide patent
Patent No.:	201029044149.4
Software copyright No.:	2009R11L098079
Technology:	Advanced face recognition and patented pupil detection technology
Usage:	Suit for all vehicles
Method:	With signal output for fleet management system
Voltage:	Normal operating voltage 12V, 24V
Min voltage	Min operating voltage 9V
Max voltage:	Max operating voltage 32V

  Features of car alarm security system MR688                     Non-contact mode detection.   Work all around the day.   Distinguish real doze or untrue sleep, effectively reduce false warning.   Early warning for drowsy status.   Detect sleeping with eyes opening.   Detect sudden sleep.   Detect mindlessness and scatterbrained.   Can be used by people with glasses or sunglasses.   Small size and beautiful outlook, easy to be installed and adjusted.     Driver Fatigue Monitor MR688 Civil Standard Version Introduction MR688 civil standard version is more suitable for the single driver, the installation is very simple, you just need to fix it on  the dashboard and then plug the power adapter into the cigarette lighter socket, and plug the other end of the cable into  host power supply socket. When the MR688 detect driver’s sleepy, it will alarm to wake up the drivers, make the early  warning before the accident happened. Besides, If MR688 detects drivers looking around or distraction, it also will alarm   to warn the driver to keep the eyes on the road.     Main Feature   1. In-time driver Fatigue alarm.    2. Driver looking around and non-concentrating alarm.    3. Alarm sensitivity and volume setting: By hand.   4. Signal output: No    5. Power Connection: Cigarette lighter power.   6. Accessory: Cigarette lighter power, magnet.   7. Application: Easy and simple          DIP Switch Setting   1. Sensitivity setting:   Because of the different understanding to the product, peoples’ initial expect of purchasing is to hope the product can be    alarmed once their eyes closes. In fact, this may cause some non-sleeping warning, they may complain too much warning    after using several time and prefer to make alarm only for real sleepy condition. So we set up 2 levels sensitivity to help    customers adjusting conveniently when they use the product. Each level it can quickly detect the real sleepy or    absentminded condition, only the alarming time is different for looking around and normal eyes closing.        Please see above pictures, the toggle switch located at the back side of the product, it will be pushed to the OFF position  before delivery.          1A: DIP1=OFF(Pull down), for testing sensitivity(high sensitivity, for test use), it takes about 2-3seconds to alarm when detect    the driver’s sleepy or distraction.   1B: DIP1=ON(pull up), for normal sensitivity, it takes a little bit more time to make alarming when detect driver’s fatigue or    distraction, about 4-5seconds.    2.Volume setting:   Everyone has the different requirements about the alarm volume. The volume can be set by    adjusting the DIP switches 4(DIP-4)      3A: DIP4=OFF(pull down), high volume.   3B: DIP4=ON(pull up), low volume.   Note: For DIP2 and DIP3, it doesn’t have function here, it is suitable for the MR688 commercial professional version(with speed    detection module)     Scope of Application       MR688 Installation   How to install the Host ? The installation of three version hosts is the same.   MR688 has two optional brackets. Below is the installation method of these two brackets.   Bracket A : Tear the bottom adhesive protection sheet and stick the device in the middle or the right position of the instrument panel.   For optimal position, do not block the main display parameters of the instrument panel.         Bracket B : Tear the bracket holder’s bottom adhesive protection sheet and stick it in the middle or the right position of the instrument panel.   Adsorb the bracket’s suction cup with the bracket holder.        How to connect with the power?     MR688 Civil Standard Version   Plug the power adapter into the cigarette lighter socket, and plug the other end of the cable into host power supply socket.   Turn on the power adapter switch at first for using the product. Usually, cigarette lighter socket has no electricity after the car is turned off.   If it still has electricity after the car is turned off, please unplug the power adapter to avoid wasting battery power.   Target Customers   1. Single driver    2. 4S shop   3. Insurance company    4. Car renting company   Shipping     Samples are available for you at any time.   Fast delivery: once we receive your payment, we can ship the samples to you without any delay.   Best After-sales service:  Any questions from you after you buy our products, we will do our best to service you.   We are always here!   About us   Hao Nai is a dynamic leader in Vehicle security and convenience products and services. Hao Nai Industrial Co., Ltd. was   incorporated in 2000. The Company was created to develop and distribute driver safety solutions that utilize existing software   infrastructures to provide vertical applications to commercial customers and consumers. “CareDrive” is the well known brand   under Hao Nai company. Except for our strong R&D team, Hao Nai has Strategic Partners in Vehicle Manufacturing,   Researching Center of famous universities, Registered Software Development Organizations, Government Technology Bureas.
      Certifications                                                                                   Contact us                                                                            Name: Sharilyn Lam   Skype: caredrive03   whatsapp/Viber: +86 188 2504 1671   If any questions, just contact us.