Air Cooled Industrial Glycol Water Chiller

Air Cooled Industrial Glycol Water Chiller widely used in many industries, such as food process industy, chemical industry, plastic industry, paper industry, pharmaceuticals industry, mechnical & engineering, brewery beverage, aquiculture, printing industry, winery and electronics/telecom etc. Cooling capacity from 0.5 HP ~ 60 HP, Running condition can be -35 degreeC. We AMRTA Chiller is about designing and manufacturering highly efficient, reliable and customer-focused Industry Chiller. We have one of the stringent control mechanisms in place ofr manufacturing processes and product quality. Amrta always works closedly with customer. We continually strive to meet the customer's demands.

Application areas
● Small Offices, Hotels, Hospitals
● Industry

● Administration
● Small commercial and residential buildings

Why this choice?
● Very high efficiency with R410A
● Very low noise operation
● R410A scroll compressors
● Advanced control
● Unit with pump and optional buffer tank
● Very compact for outdoor or indoor installation

Characteristics
01. Structure. Panels and base frame are made from alvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.

02. Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.

03. Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
04. Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with antifreeze heating element (option) and differential
pressure switch, factory insulated with flexible close cell material.

05. Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins,100% fully quality tested; sub
cooling circuit to prevent freezing at the base (optional); protected with metal grill.
06. Desuperheater. High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material(optional).

07. Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset . The heat pump system unit is completed also with 4-way valve, liquid receiver and one way valve.

08. Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors Water pump (8kW-30kW), differential pressure switch Expansion tank (8kW-30kW).

09. Electric panel

Compressor contactor

Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller

10. Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed.
Stainless steel covering
Remote condenser
Tube in tube heat exchanger
Water circuit electric heater

Air Cooled Scroll Water Chiller Technical Data

Unit Pictures

Our Factory and Certificates

Some Overseas Projects

We Amrta Commercial Air Conditioning including different products, Rooftop Packaged Unit is our of our main products, it with different functions, Free Cooling Rooftop Packaged Unit, Explosiong-proof Rooftop Packaged Unit etc.  Air Cooled Water Chiller and Water Cooled Water Chiller is also our main products. Our terminal products is Fan Coil unit and Air Handling Unit.