600 meter 10/100M PoE extender over Cat5e/6

New 600 meter 10/100M PoE extender over Cat5e/6 or coax cable(EX1703)

Features

• Converts Ethernet UTP to transmit network data and PoE over standard coax cable.

• Extends Ethernet beyond 328 feet (100 m) limitation up to 3280 feet (100+100+600=800m) over Coaxial cables.

•  This item could work with 3 kinds of cables:coaxial cable,Ethernet cable,Power cable

• Saves additional equipment costs and reduces installation time.

• Pass Through PoE compatibility with 802.3af and 802.3at Power over Ethernet reduces installation costs while maintaining camera safeguards.

• Certified High data rate, ideal for high bandwidth requirements of Mega-pixel cameras, multiple IP cameras systems and cameras requiring Jumbo Frame transmission.

• Symmetric Bandwidth provides consistent upload and download with Virtual Zero Packet Loss over total specified distance.

• Type tested to RFC-2544 TCP/IP network bandwidth packet transmission standards.

• Built in transceiver cable connectivity tester.

• Type tested for -10°C to +55°C temperature range under NEMA-TS2 testing standards.

• Data rate selectable to for maximum bandwidth utilization.

• Complies to major IEEE standards and RFC network protocols for UDP, TCP/IP, HTTP/HTTPS.

• China designed and manufactured.

• Applications

• Retrofit analog CCTV installations into Digital systems.

• Extending Networks in industrial environment.

• CCTV System for Casinos, Airports, School Campuses

 

Ethernet over Coax Network extender brings new performance standards to the growing need for high speed transmission of full bandwidth Ethernet and Power over extended distances of coaxial cables. Its unique Symmetric Bandwidth  assures full bandwidth transmission is maintained over the entire operational distance for both uploads and downloads with Virtual Zero Packet Loss . Bandwidth assurance provides the ability to transmit multiple cameras on single camera runs with no informa- tion loss.

 

Pass Through PoE eliminates the need for additional remote site power while allowing a single PoE source, such as a PoE network switch, to provide power to both transceivers and the camera. This feature eliminates the need for local and remote site power supplies. Type tested under NEMA-TS2 environmental standards for extended temperature operations between -10C° to +55C°, the is the perfect solution for extended distance data and power transmission for warehouses, parking lots, campuses, casinos, and many more.

EX1703 is low power and easily fits inside most cameras housing and junction boxes. Best of all, type tested to network packet performance standards, and major manufacturer compatibility tested to assure you error free and reliable operations.

 

Installation cost savings, proven performance, and major camera brand compatibility all go into making EX1703 your best choice for extended distance data and power transmission.

 

Technical Specification

Electrical

Ethernet Interface Standard 10BaseT

Data Rate Auto select 100Mb/s

Full speed / full duplex at maximum rated distance

Coax 75 Ohm, 3280 feet (600 m)

Power need for this device: PoE 2 W (max.)

Standard Ethernet: Traffic, Link Extended Ethernet: Traffic, 100BaseT

Extended Interface: RJ45 Connector

RFC 2544 TCP/IP Packet Transmission

PoE Compatibility IEEE 802.3af , IEEE 802.3at

 IP over Ethernet

Environmental

Humidity 0 to 95%,

Temperature Operating: -10°C to +55°C

Mechanical

Dimensions 45*19.5*18.5MM(BNC connector & cable excluded)

Weight 45 g

Material :ABS

 

Application Diagrams:

 

1. Only for the POE systems connected way as below picture(EX1703) :

 

 

2. Supporting Ethernet over coax POE Ip system with existing coaxial cable connected way as below picture:

EX1703+IPVE703

 

Attention, second diagram connected way must working with IPVE703 which can transmit Data+ PoE