4WMM10 Hydraulic Manual Directional Spool Control Valve

4WMM10 Hydraulic Manual Directional Spool Control Valves 

The 4WMM10 Series Directional Control Valves are operated by worker hand directly, to change the position of the direction spool. When the spool on the center position, for the E type as example, the oil ports of P, A, B, T are closed. The valve spool moves forward if the hand lever pull forwarder, the inlet oil port P connects to B, and the outlet T port connects to A port accordingly in the valve house. If pulling the hand lever at the end of the back, the the inlet oil port P connects to A, and the outlet T port connects to B port accordingly in the valve house, achieving the direction processing, which is used to control the oil line on or off, oil directional way or reducing pressure. The method to install is by subplate.

4WMM10 Manual Directional Valves only have one method to control the direction,but Solenoid & Manual Directional Valves like 4WMME Series which have two ways to control the direction.Not only by the electromagnet also can be controlled by the handle.4WMM6...6X.... type manual directional Valves are direct operated spool valves which switch the flowfluid by rotating the handle to move the spool axially.