32m JMC Ladder Lift Truck

The ladder lift truck is mainly composed of sub frame assembly, ladder assembly, turntable assembly, winch assembly, hydraulic system, Electrical system, etc. Mainly used for moving companies, project leasing, solar installation, billboard installation, air conditioning installation, cement sand and gravel handling, building materials upstairs, construction waste handling, bulky upstairs handling, ship maintenance, road and bridge maintenance, etc.

One-button Ignition, Flameout

Ignition and flameout control of the engine can be carried out on both the control panel and the wireless remote control.

Night Safety Lighting

The lights on the boom could be controlled in the control panel in the vehicle.

Work Diagram

During operation, the angle of the ladder can be visually checked, and the height of the ladder can be known at any time.

Remote Control

One-hundred-meter remote control, can control by one key turn off/ start, bucket carriage could be move up and down in automatic operation.

Dump Bucket

Easy to install dump bucket, can load 0.3 to 0.4 cubic meters of sand each time.

Hydraulic System

Germany BOSCH complete set of hydraulic system, balance valve unit and multi-way valve

Hydraulic Outriggers

Jack and cylinders are FAST brand, (which exported to the USA and Japan ) the cylinder has an independent steel stamp, which is an important part of the vehicle

Other Good Quality Parts

Hydraulic motor (imported parts): drive the winch

Brake (imported part): lock the winch

Hydraulic lock (import part): lock hydraulic oil (prevent pressure relief)

Reducer (imported parts): deceleration motor, auxiliary stop rotating platform

Standard Features:

1. Air pump: This refers to a device that is used to inflate or deflate something such as tires or an air mattress.
2. Hydraulic radiator: This is a component that helps to regulate the temperature of the hydraulic fluid in a machine.
3. Platform travel memory function: This refers to a feature that enables a platform to remember its previous position and return to it automatically.
4. Integrated wired and wireless remote control: This means that the machine can be controlled both by a wired remote and a wireless remote.
5. Safety systems such as boom withdrawal limit, leveling device, and overload detection: These are safety features that prevent accidents by limiting the boom withdrawal, ensuring that the machine is level, and detecting when the machine is overloaded.

Optional Features:

1. Engineering lights on the ladder boom: These are lights that can be installed on the ladder boom to improve visibility when working in low-light conditions.

BRIEF

The aerial ladder truck, also known as the ladder lift truck, high-altitude transport vehicle, aerial work vehicle, or aerial ladder moving truck, serves various purposes including project leasing, curtain wall construction, roof waterproofing, solar panel installation, advertising, power maintenance, air conditioning installation, moving company services, cement and sand handling, ship maintenance, road and bridge repair, and more. Our JMC ladder lift bucket truck boasts a 32-meter height capacity, equivalent to an 11-story building, and is constructed with high-strength special aluminum mounted on a JMC truck. It has a material handling capacity of 400 kg.

FEATURES

Our product comes with a range of standard features, including:

• A cab travel recording system
• An anti-slip base plate floor
• A Vehicle Level State Tester
• A hydraulically operated PTO
• A hydraulically operated turntable
• A console with one-button ignition and flameout
• Electric operation from the working platform and remote control within a 100-meter range on the ground
• A forum with an automatic leveling system and lower bottom design
• The platform runs up and down using rubber wheels with hydraulic assistance
• A platform travel memory function that allows the operator to push a button to reach a designated position, suitable for multiple round-trip operations at the same height, with the lifting speed adjusted freely
• Imported main hydraulic motors, brakes, hydraulic locks, multi-way valves, balance valve groups, and reducers
• Double luffing cylinders for the ladder boom, with synchronous expansion and retraction, ensuring stable arm lifting and turning
• A radiator with automatic and manual modes that starts cooling automatically when the temperature reaches 35 degrees
• An emergency brake that includes a gear brake and plunger brake
• Night security lights on the ladder boom for increased safety during nighttime operations
• An automatic interlocking device for getting on and off the vehicle
• A ladder limit position alarm device including sound and light alarms, automatic pressure relief, and ladder angle prompts when the mechanical limit is operated.

Optional Features:

• Hopper

SPECIFICATION

Model	LLC32JX1160L6
Chassis	JMC Shunda 4X2Drive LHD; JMC JX4D30B6H diesel engine; JMC 5MTI280Y manual transmission
Cabin	Crew cab; Rated nr. of passengers: 5
Overall Size	5995×1900×2850mm (L×W×H)
Wheelbase	3360mm
Wheel Tread	Front 1385mm; Rear 1425 mm
Front/Rear Overhang	1075/1560mm
Gross Vehicle Weight	4495kg
Tare Weight	4170kg
Axle Rating	1835/2660kg
Approach/Departure Angle	28°/18°
Engine	JMC JX4D30B6H, diesel engine; 4 cylinders in-line, 2.892L; Class level VI emission
Engine Output Power/Speed	85kW(116hp)/3200rpm
Engine Output Torque/Speed	281N·m/1800rpm
Max Speed	100km/Hour
Transmission	JMC 5MTI280Y MT; Forward, 5 speed/Reverse, 1 speed
Tires	7.00R16LT 10PR; 6+1 spare tire
Lifting Ladder Assembly:
Section	7
Max Working Height	32m
Max Working Reach	12m
Carrier Lifting Capacity	400kg
Carrier Size	1100X1000X450mm
Rotation Angle	±90°
Outrigger Extension Span	1100mm
Outrigger Retraction Time	20s

FAQ

1. who are we?

We are based in Hubei, China, start from 2009,sell to Domestic Market(50.00%),Southeast Asia(9.00%),Africa(6.00%),South America(5.00%),Mid East(5.00%),Central America(4.00%),North America(2.00%),Eastern Europe(2.00%),Oceania(1.80%),Eastern Asia(1.20%),Western Europe(1.50%),Northern Europe(1.30%),Southern Europe(1.70%),South Asia(1.50%). There are total about 1000+ people in our office.

 

2. how can we guarantee quality?

Always a pre-production sample before mass production;

Always final Inspection before shipment;

 

3.what can you buy from us?

Fire Truck,LPG Tank Truck,Fuel Tank Truck,Tank Truck,Cleaning Truck,Garbage Truck,Tow Truck ,Bucket Truck,Construction Truck,Van Truck,Truck Mounted Crane,Utility Truck,Tank Semi Trailer,Semi Trailer

 

4. why should you buy from us not from other suppliers?

Our advantages:

1. manufacturer & factory of special trucks in China

2. years' experience in this fields

3. owns workshop, profesional works & experienced engineers

4. complete procedure for order, production, sales,

5. national & international maket

 

5. what services can we provide?

Accepted Delivery Terms: FOB,CIF,EXW,DAF,DES；

Accepted Payment Currency:USD,CNY;

Accepted Payment Type: T/T,L/C,MoneyGram;

Language Spoken:English,Chinese