1 / 1
Model No. : | MLL-S-532 |
---|---|
Brand Name : | CNI |
Warranty : | 1 Year |
Product description
532nm 300mw solid low noise laser features with ultra compact, small size, wide operating temperature, good sealing, long lifetime, cost -effectiveness and easy operating, working under the pressure of 0.02kPa, which is widely used in DNA sequencing, flow cytometry, cell sorting, optical instrument, spectrum analysis, interference, measurement, holography, laser printing, chip inspection, physics experiment, etc.The power stability (over 4 hours) is <1%, <2% , <3% optional. The transverse mode is TEM00 and the beam diameter at the aperture is nearly 1.5mm. The beam height from base plate is nearly 19 mm. The warm-up time is less than 10 minutes and the M2 factor is less than 1.2. Otherwise, the warranty is within one year and the working temperature is between 0-60 and 10-35℃ optional. The expected liftime is about 10000 hours.
Model
MLL-S-532-A(Harsh condition)
MLL-S-532-B(Normal condition)
Output power (mW)
>1,5,10,20,-,200
>200, -, 300
Power stability (rms, over 4 hours)
<1%,<2%,<3%
<2%,<3%
IP Rating
IP67
IP65
Operating temperature (℃ )
0-60
10-35
Max. Heat Dissipation of Head(W)
10W@50℃
4W@25℃
Central wavelength (nm)
532±1
Operating mode
CW
Transverse mode
TEM00
M2 factor
<1.2(<1.1 optional)
Beam diameter at the aperture( 1/e2 ,mm)
0.7±0.05
Beam divergence, full angle (mrad)
<1.5
Polarization ratio
>100:1 Horizontal±5 degree (Vertical
Optional)
Pointing stability after warm-up (mrad)
<0.05
Pointing stability Over Temp. (µrad/°C)
<8
Noise of amplitude (rms, 20Hz~20MHz)
<1%,<0.5%
Warm-up time (minutes)
<5
Beam height from base plate (mm)
19
Power Consumption(W)
<40
Shock Tolerance(6ms)
7g laterally,15g vertically
Power supply(90-264VAC)
PSU-H-FDA
PSU-A-FP
PSU-III-OEM-97(5VDC)
Modulation
TTL on/off, 1Hz-1KHz, 1KHz-10KHz, 10KHz-30KHz;
and Analog modulation
option
Expected lifetime (hours)
10000
Warranty
1 year
Changchun New Industries (CNI) founded in 1996, located in Changchun, CHINA, is a leading manufacturer of solid-state and diode laser systems. Our products include green laser, blue laser, yellow laser, red laser, RGB laser, infrared laser, UV laser, single longitudinal mode laser and Q-switched laser systems. CNI lasers are featured with high performance, low cost and excellent laser beam quality, which are specifically designed for OEM, scientific, industrial and instrumentation use. In addition, CNI lasers are ISO-9001, FDA, CE and JQA certified.
FAQ
1. What about the delivery?
TNT UPS FEDEX DHL
2. What about the warranty?
For 1 year
3.How to pay?
T/T Western Union
Send your inquiry to this supplier