1 / 1
Model No. : | MD-15 |
---|---|
Brand Name : | cowell |
Product description
Breakaway | ||||||||||||||||||||||||||||||||||||
MD-3 MD-7 | MD-3/MD-7 BreakawayMD-3/MD-7 Breakaways built with check valve are used for connecting the hose and the dispenser. When the pull is too strong, the breakaway will be broken and closed automatically to avoid the fuel flowing. | |||||||||||||||||||||||||||||||||||
installed on fuel dispensing hoses, and will separate when subjected to a designated pull force. The dual valves seat automatically stopping the flow of fuel and limiting any fuel spillage, while protecting the dispensing equipment. When reconnecting the separate halves, the seals tightly on an O-ring before the poppet stems engage to open the valve. For proper operation on high- hanging hoses, the breakaway must always be installed with straightening hose with a minimum length of 9”. For low hose applications, it should beinstalled down-stream of retractor cable. MD-15 Breakaway Performance Curve:
Main Seals: Viton Main Spring: Stainless Steel Guide & Poppet: POM Protective Sleeve: PA66 Feature & Benefits: •Pull force: with a pull force of 250lbs±5% •Unique double-poppet design: with low pressure drop •Flow rate: 0-60L/Min •Working Pressure: 0.18Mpa •Coupling halves: protected by proven plastic sleeves Easily reconnected: Just “push and twist” until you hear an audible click, signifying the unit has been correctly reconnected. Reconnection force approximately 15lbs •Line shock: It is able to absorb the effects of normal lineshock through the unique design of the disconnecting features. Send your inquiry to this supplier Send Inquiry
|