200W Doppler Radar Microwave Movement Sensors

200W Doppler Radar Microwave Movement Sensors is an active motion detector emits high-frequency electro-magnetic energy (5.8GHz) and receives the echo from movements in the detection zone. An internal microprocessor then triggers and connects the load to the supply ( 'On' command). Microwave Detectors are ideal for switching lighting loads and can be used for switching lights on from off to full output when someone enters an area.

While there is movement in the area, the sensor will hold the load on. The sensor can be adjusted so that when movement stops the load will switch off after 18 seconds to 1 mins.

FEATURE

Built-in Photocell-Daylight Sensor

Energy efficient and cost effective

Non-contact detection

Readings not affected by temperature, humidity, noise, air, dust or light - suitable for hardsh environments.

Strong resistance to radio frequency interference

Low output, unharmful to human

Wide detection range and high velocity.

Supports non-living object detection

Technical Specification

1.Model: AM-RS-03
2.Input Voltage: 85V-265V AC / 50Hz
3.Output Voltage: 85-265V AC

4.Microwave Frequency: 5.8GHz

5.Material: Flame-retardant ABS
4.Load: 5-200W (Incandescent Lamp,Fluorescent Lamp)
5.Standby power:<0.5 W
6.Working Temperature: -20° ~ +65°C
7.Sensing Distance: 6~8m radius
8.Time Delay: 18-25s adjustable
9.Photo sensing: <10lux
10.Microwave Emission: < 10mW
11.Coverage: 360° (depends on fitting and surrounding)
12.Install: indoor

Product show

Wiring diagram