Specifications 1900MHz Frequency Shift mobile Repeater
1.easy installation
2.high gain and output power
3.OEM/ODM Service
4.ISO9001:2008
Product Description PCS1900 10W Band Selective Repeaters(KT-PRP-B60-P40-B)
Kingtone Repeaters system is designed to solve problems of weak mobile signal,
which is much cheaper than adding a new Base Station (BTS). Main operation of RF
Repeaters system is to receive low-power signal from BTS via radio frequency
transmission and then transmit the amplified signal to the areas where network
coverage is inadequate. And the mobile signal is also amplified and transmitted to the
BTS via the opposite direction. High linearity PA; High system gain; Intelligent ALC technology; Full duplex and high isolation from uplink to downlink; Automatic Operation convenient operation; Integrated technique with reliable performance; Local and remote monitoring (optional) with automatic fault alarm &remote control; Weatherproof design for all-weather installation; Application:
To expand signal coverage of fill signal blind area where signal is weak
or unavailable.
Outdoor: Airports, Tourism Regions, Golf Courses, Tunnels, Factories, Mining
Districts, Villages etc.
Indoor: Hotels, Exhibition Centers, Basements, Shopping
Malls, Offices, Packing Lots etc.
It is mainly applicable to such case:
The repeater can find an installation place which can receive pure BTS signal at
strong enough level as the Rx Level in repeater site should be more than70dBm;
And can meet the requirement of antenna isolation to avoid self-oscillation.
Technical specification
Items | Testing Condition | Specification |
Uplink | Downlink |
Working Frequency(MHz) | Nominal Frequency | 1850~1910MHz | 1930~1990MHz |
Gain(dB) | Nominal Output Power-5dB | 95±3 |
Output Power (dBm) | WCDMA modulating signal | 33 | 40 |
ALC (dBm) | Input Signal add 20dB | Po≤±1 |
Noise Figure (dB) | Working in-band(Max. Gain) | ≤5 |
Ripple in-band (dB) | Nominal Output Power -5dB | ≤3 |
Frequency Tolerance (ppm) | Nominal Output Power | ≤0.05 |
Time Delay (us) | Working in-band | ≤5 |
Peak Phase Error(°) | Working in-band | ≤20 |
RMS Phase Error (°) | Working in-band | ≤5 |
Gain Adjustment Step (dB) | Nominal Output Power -5dB | 1dB |
Gain Adjustment Range(dB) | Nominal Output Power -5dB | ≥30 |
Gain Adjustable Linear(dB) | 10dB | Nominal Output Power -5dB | ±1.0 |
20dB | Nominal Output Power -5dB | ±1.0 |
30dB | Nominal Output Power -5dB | ±1.5 |
Inter-modulation Attenuation (dBc) | Working in-band | ≤-45 |
Spurious Emission(dBm) | 9kHz-1GHz | BW:30KHz | ≤-36 | ≤-36 |
1GHz-12.75GHz | BW:30KHz | ≤-30 | ≤-30 |
VSWR | BS/MS Port | 1.5 |
Our Services
Company Information