Eolienne pignon The main superiority of our small wind generators as below: 1) Pretty quiet, very very low noise . 2) Good output, our blades and motor is slightly bigger than competitors. 3) Safety in strong wind conditions. Other highlights like low vibration construction; truly marine anti-corrosion, simple installation and durable. Company pledge Why choose us? Our own factory in Taizhou, China.
10 years experience of wind turbine design and producing
8 years OEM of a famous brand small wind generator in international markets
Our own mould making and processing center.
100% products for export markets.
Our wind generator: The main superiority of our small wind turbine as below: 1) Pretty quiet, very very low noise . 2) Good output, our blades and motor is slightly bigger than competitors. 3) Safety in strong wind conditions. Other highlights like low vibration construction; truly marine anti-corrosion, simple installation and durable. Specification: turbinas eolicas
Molde: | X-2000 |
Rated power: | 1500w |
Max power: | 2000w |
Nominal wind speed: | 13m/s |
Start-up wind speed: | 1.8m/s |
Security wind speed | 50m/s |
Rotor diameter: | 1.90m |
Number of blades: | 5 |
Blade material: | Carbon fibre composite |
Body: | Magnalium framework |
Generator: | Permanent magnet, AC output |
Rated voltage: | 24VDC / 48VDC / 96VDC |
Brake: | Electrnmagnetic brake |
Equipment surface protection: | Aluminum oxide+plastic coating |
Gross / Net weight | 30kg/25kg |
Packing size | 111x62x28cm |
Technology The Features & Technology: Our wind turbines feature advanced technology to improve performance and durability; Here are some features and technologies included in our wind turbine: Generator We use the strongest magnets (Neodymium Iron Boron Magnets) and most advanced technology for our rotor. Experiments show that using Neodymium Iron Boron Magnets as materials, it is more light weight and high efficient than any other materials. And our rotor tangential structure design also contributes to the whole rotor superior. Stator using high temperature durable lacquered wire materials, plus vacuum impregnation treatment, the insulation performance greatly improved, also more durable. Having two bearing allows the wind turbine to start faster than a single bearing wind turbine. Thanks to this technology you can start producing energy at wind speeds as low as 2,5 m/s. Double bearing system also have the advantage of reducing the vibration emitted by the generator.
Blades For same length blades, due to airfoil differences, output power and effiency is not same. Therefore, optimizing design of blades airfoil is very important. With our technology on fluid dynamics and aerodynamics, together the adoption of European blade design idea, our blades obtain a good start up performance and higher output than competitors. Besides, another superiority about our blades is the carbon fiber composite materials. Using the most advanced technologies, our blades contain 20% carbon fiber. Carbon fiber is light weight, flexible and long life span. Due to these characteristic, blades have the advantages of bending at high speeds, thus reduce airflow force and slow down in high wind speed conditions. Blade with galss fiber materials, it is tough, sometimes in strong wind conditions, blades can’t give off the strong wind force, thus destroy the installation.
And we have made the rotor blades balance treatment, in order to keep the quiet and no vibration when rotating. We make inside nuts fasten structure between blades and hub connection. Aerodynamic body design Using high strength aluminum alloy materials, plus precision die casting technique, makes our wind turbine body is light weight, high strength, anti-corrosion and durable. Besides, aerodynamic design is makes our wind turbines more effective but also more pleasing to your eyes. All our turbines have a powder coating finish, not only does it give them a perfect painting and feel but it also increases its life span by protecting the body from any weather condition and is easier to clean. Besides, aerodynamic design also contributes to this super low noise. Double Security System All our wind turbines are equipped by not one but two security systems. If the wind is too strong and the rotor speed is too high our security systems will directly act on the generator to prevent damage to the system. Slip ring : Poor quality slip has the problem to bear high currents, thus in strong wind conditions, slip ring/brush overheating. This slip ring is an integrated one; there are high copper materials involved. This slip ring can stand as high as 200A instant current. And its design is very very smooth, thus it can quickly turn the body to the wind direction to get a high our effiency.
In a conclude, good quality & reliable performance, long time durable are our main concerns, most of all, good quality products at an affordable price for all consumers. And we are glad and feel confident to hear your comparing feedbacks with other famous brands wind turbines in the markets.
Frequent asked questions: 1. How about noise of this wind generator? The sources of sounds emitted from operating wind turbines can be divided into two categories: 1) Mechanical sounds, from the interaction of turbine components. 2) Aerodynamic sounds, produced by the flow of air over the blades. Our mechanical design, like double bearings; front-back faces; exceptional blades assemble and anti-vibration plastic pad connection with pole, blades design and materials, all these contribute to make IDEAL400 the quietest wind turbine in the world. 2. Is it anti-corrosion in marine condition?
The body is made of a lightweight magnesium and aluminum alloy, and coated with a marine-grade polymer powder coat to prevent oxidation or corrosion.
Our latest study found that in order to anti corrosion for a long time, we follow these steps: Surface polishing Zinc-aluminum coating treatment Zinc-aluminum coating is composed of ultrafine zinc and ultrafine aluminum and none-chrome mental salt, it is a non-electrolytic inorganic coatings. After the treatment, the coating form an anti-corrosion surface of inorganic zinc sheets and aluminum flake.No organic solvents, non-toxic metals (such as nickel, lead, barium and mercury) and Cr, so more environment friendly. Sandblasted Using two layers of epoxy powder painting. Most manufacturers adapt single epoxy powder coating , a thin layer painting, surface porosity, or painted surfaces damaged during installation, these will lead to corrosion, our double epoxy coating is approved to be a good solution to this corrosion issue. For video information, pls check below: http://www.youtube.com/user/newmeilwindturbine
1 PIC