Waterproof material Single-Liquid type Polyurethane Foaming agent RUTH IP-11 Polyurethane is a one-component polyurethane, hydrophobic or Hydrophilic resin, which reacts with water to produce a flexible or inflexible grout suitable for waterproofing and sealing cracks and joints of concrete surfaces, and for effectively stopping water leaks.
Item | Index |
Water-base | Oil-base |
Appearance | Transparent maple liquid | Transparent brown liquid | |
Density (g/cm3 25°C±0.5°C) | 0.98-1.10 | 1.02-1.10 | |
Viscidity (Mpa.S 25°C±0.5°C) | 60-500 | 300-600 | |
Solidification Time (S) | 10-1300 | |
Expand Rate(%≥) | 100-400 | 1000-2000 | |
Characteristics 1,It will have polymeric reaction when injected from injection machine, expand and become hard with the sands and clay in the wall, thus plug up the crack permanently and reach water stop effect surely. 2,The solidify time can be controlled from several seconds to several minutes. 3,High rate of expansion, good tenacity, low shrink, strong adhesive power with the base material, and suitable for different water resource. 4,Can be applied in low temperature environment. 5,Single component material, easy construction, easy clean. Safety caution matters 1. During application please wear protection apparatus(ex. Glove,goggle),avoid to direct contact to skin,if happen please use running water to flush,if contacted to eyes need to go to hospital for medical care immediately.
2. This product is solvent based material,during application needs to have well ventilation and away from any fire sources. Before material dried,around construction area do not spark any fire.
3. Machine after used needs to use cleaner to clean up thoroughly. Storage Store indoors with good ventilation, keep away from fire and sunlight. 6 month’s shelf life, if store in the original container. Package 20KG/10KG special made iron pail.
NOTE: We are speicalize in the whole series of water stop system: high pressure injection pump, injection packer, Polyurethane grouting material, epoxy injection resin, etc.