Product Description
Production Capacity: 100-350T / H
Note: This is only an average value, and the specific is subject to the clients' actual equipment configuration in site.
Applicable Materials
Limestone, river gravel, rocks, bluestone, cobblestone, weathered sand, basalt, granite, quartz, diabase
Construction sites, gravel plants, concrete hydropower dam site, metallurgy, building materials, utilities and other industries washing operations
LSX spiral sand washer machine can be used for cleaning and separating the powder dust and soil from construction sand. Novel seal structure and reliable transmission of this sand washing device make sure the cleaning effect. LSX sand washing machine is usually used with a sand making equipment, and there are two sorts of single spiral type and double spiral type, with features of a high degree of washing, reasonable structure, large capacity, low power consumption, and less loss of sand available. Especially transmission parts of sand washing machine are water and sand isolated, so the failure rate is much lower than the commonly sand washing machine. So it is the best choice for upgrading washing sand industry.
The electric motor runs slowly with the impellor after being decelerated by the belt, decelerator and gears wheel. The sand and stone flow into washing launder from feeding launder, roll with the impellor, and grind each other. The impurity covering the sand is washed away. At the same time, adding more water, the strong water flow will take away waste and some low-weight wastes from washing launder. Through the above process, the washing function is finished. The clean sand and stone is lifted up by vane. When it goes up slowly, the water begins to drop through the mesh and fall back in the washing launder. On one hand, water is removed from the sand and stone; On the other hand, the water can be fully used. Finally, the sand and stone go to the out launder from the rotary impellor to finish the washing task.
|
LSX-920 |
2LSX-920 |
LSX-1120 |
2LSX-1120 |
(Pcs) |
1 |
2 |
1 |
2 |
(mm) |
920 |
920 |
1120 |
1120 |
(mm) |
7585 |
7585 |
9750 |
9750 |
(mm) |
≤10 |
≤10 |
≤10 |
≤10 |
(t/h) |
100 |
200 |
175 |
350 |
(r/min) |
21 |
21 |
17 |
17 |
(KW) |
11 |
11×2 |
18.5 |
18.5×2 |
(t/h) |
10-80 |
20-160 |
20-150 |
40-300 |
(t) |
6.2 |
11.5 |
10.9 |
17.8 |