Product description
Performance features:
- Single component
- Completely water-based, eco-friendly
- Quick drying
- High coverage
- Color and appearance: white or others
- Coating thickness: 42, ±5um
- Solid content: 52, ±3%
- Density: 1.10g/m3
- VOC: <35g/L
- Dry time: top coat dry time (≤50% R.H.)
- Theoretical coverage: 10.5m2/L
- Overcoating interval: minimum 5 hours, maximum unlimited
Recommended substrate conditions and temperature:
- Remove all oil or grease, soluble contaminants and other foreign matters. All surfaces to be coated should be clean, dry and free from contamination.
- Apply in good weather, don’t let coating contact any liquid like water or other solvent before completely dry. No painting work be carried out in rainy day outdoor, if the humidity is above 85%, please stop painting
- Temperature of substrate should be above 5°C, lower temperature might not dry or cause a long time to dry
Air spray:
- Nozzle orifice: 1.5-2.5mm
- Nozzle pressure: 0.3-0.5MPa
Airless spray:
- Nozzle orifice: 0.4-0.5mm
- Nozzle pressure: 12-15MPa
Brush: use soft brush
Shelf life: 12 months
Recommended primer: RSL primer series
Storage temperature : 5-30°C in well ventilated warehouse
Stir thoroughly before painting
Attention:- This datasheet is made based on the lab test, it is believed to be true and accurate. As workmanship, weather, construction equipment, quality of other materials and other variables affecting results are all beyond our control, we do not take any responsibility for the consequences caused by improper use of this product
Single component
Completely water-based, eco-friendly
Quick drying
High coverage
Color and appearance: white or others
Coating thickness: 42, ±5um
Solid content: 52, ±3%
Density: 1.10g/m3
VOC: <35g/L
Dry time: top coat dry time (≤50% R.H.)
Theoretical coverage: 10.5m2/L
Overcoating interval: minimum 5 hours, maximum unlimited
Remove all oil or grease, soluble contaminants and other foreign matters. All surfaces to be coated should be clean, dry and free from contamination.
Apply in good weather, don’t let coating contact any liquid like water or other solvent before completely dry. No painting work be carried out in rainy day outdoor, if the humidity is above 85%, please stop painting
Temperature of substrate should be above 5°C, lower temperature might not dry or cause a long time to dry
Nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5MPa
Nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15MPa
This datasheet is made based on the lab test, it is believed to be true and accurate. As workmanship, weather, construction equipment, quality of other materials and other variables affecting results are all beyond our control, we do not take any responsibility for the consequences caused by improper use of this product