(SD-038) 1.5-38mm Economical Manual Copper Cable Wire Stripper Machine

1.5-38mm Wire Cable Stripper Machine SD-038:
This model is easy to operate, convenient to carry, energy saving.
This machine is driven by electric and hand cranked respectively. Operator can choose the working way.
It has multiple stripping holes suitable for stripping any types of wire ranging from 1.5mm-38mm in diameter.


A: Flat cables/wires feeding hole
B: Diameter 1.5-6.0mm cables/wires' feeding hole
C: Diameter 6.0-9.0mm cables/wires' feeding hole
D: Diameter 9.0-13.0mm cables/wires' feeding hole
E: Diameter 13.0-16.0mm cables/wires' feeding hole
F: Diameter 16.0-19.0mm cables/wires' feeding hole
G: Diameter 19.0-24.0mm cables/wires' feeding hole
H: Diameter 24.0-28.0mm cables/wires' feeding hole
I: Diameter 28.0-38.0mm cables/wires' feeding hole

Manual of SD-038:
1. Comparing the cables/wires' diameter with the feeding holes on the machine, feeding the cables/wires one piece at one time. Before feeding the cables/wires, please cut off the head of the cables/wires, to avoid gaps caused to the blades.

2. On the output side, if the cuts on the cables/wires are too deep, please check below points:
A. Please adjust the handles on the input side, screw down or loose them. (M12 handles)
B. Check whether the cables/wires on the right position as you feeding them.
C. Make sure the blades are sharp, if not, polish them with the oil stone

3. If see the blades tilted:
A. Check whether the center adjuster was loosed.
B. Centering adjustment and adjust thescrews of two sides of it.

Make sure the cables/wires' diameter are similar with the feeding holes, large cables/wires in large feeding holes, small cables/wires in small feeding holes, flat cables/wires in flat feeding holes.


Packaging
1)Plywood case or Wooden case
2)Packing method can be also changed according to the clients' special requirement

Shipping
1)By courier service
2)By air
3)By ship

Payment terms
1)L/C at sight;
2)Paypal/ Western Union
3)T/T: 100% TT or 30% deposit, 70% balance by T/T before shipment

Delivery time
1) In stock: Within 5 working days after payment received
2) Out of stock: 5-30 working days according to the quantity

Quality control
MART INDUSTRY enforces the strictest quality standard in products, ensuring the highest level of operation and service from product design and manufacture to customer delivery and after-sales services.
1)Before the order can be confirmed finally, we would strictly check the material, accessories of the sample step by step
2)We salesman, also as a order follower, would trace every phase of production from the beginning
3)We have a QC team, every product would be checked by them before packed
4)We would try our best to help clients solve problems when they occurred
5)Most of our products have passed TUV CE /GS ISO9001 certificate