Salt Spray Environmental Corrosion Test Machine/Salt Spray Tester

ISO & IEC  Corrosion Resistance Salt Spray Tester
  Usage: This machine has a standardized test method to check corrosion resistence of coated samples. Salt spray test is an accelerated corrosion test that produces a corrosive attack to the coated samples in order to predict its suitability in use as a protective finish. The appearance of corrosion products (oxides) is evaluated after a period of time. Test duration depends on the corrosion resistance of the coating; the more corrosion resistant the coating is, the longer the period in testing without showing signs of corrosion. Different coatings have different behaviour in salt spray test and consequently, test duration will differ from one type of coating to another.   1.Technical parameters:

Model	CX-60	CX-90	CX-120
Inner  Box Size  (W*D*H)  mm	600*450*400	900*600*500	1200*800*500
Outsider Box Size(W*D*H) mm	1070*580*1030	1380*800*1150	1700*950*1210
Testing capacity	108L	270L	480L
Power	220V,1.5KW ,50HZ	220V,1.5KW ,50HZ	220V,3KW,50HZ

  2. Technical Features:  Box material :   Local temperature and humidity inside and outside the box are used for A-level gray high-corrosive PVC, for salt spray, copper acetate, and other test specifications Test Saturation pressure barrel :   It uses the A-level German imports of gray PVC material. Laboratory Racks:  It uses sophisticated Class A gray PVC material designed "V" shape long, products tested by the 15 ° -30 ° angle be adjusted. Laboratory cover:It uses a 5mm thick transparent imported high toughness PVC board, bending method designed to cover 100 degree ridge-type transparent With power failure memory function of time, so after the original call time to complete the remaining time of the experimental work, with a double over-temperature protection, water shortage warning, ensure safety Technical basis:According to JIS, ASTM, CNS, GB standard parameter setting operation.  

	Standard	Laboratory	Air pressure barrel
Salt spray test	NSS ,ACSS	35°C±1°C	47°C±1°C
Corrosion test	CASS	50°C±1°C	63°C±1°C

    Technical parameter of CX-60L

Model	CX-60L Salt spray test tchambers
Inner Box Size (L×W×H)	60×40×45 cm
Outside Box Size(L×W×H)	107×60×118 cm
Equipment Material	Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent  P.V.C. rigid plastic board
Temperature Range	35°C~55°C
Temperature Fluctuations	≤±0.5°C
Temperature Uniformity	≤±2°C
Temperature Precision	±1°C
Test Chamber Temperature	Salt Spray Method (NSS ACSS)35±1°C  Corrosion-resistant Testing Method(CASS)50±1°C
Saturated air Barrel Temperature	Salt Spray Method (NSS ACSS)47±1°C  Corrosion-resistant Testing Method(CASS)63±1°C
Brine Temperature	35°C±1°C
Spray Quantity	1.0~2.0 ml / 80cm2 / hr
PH	Salt Spray Method (NSS ACSS6.5~7.2)  Corrosion-resistant Testing Method(CASS)3.0~3.2
Lab Volume	108L
Brine Tank Capacity	15L
Power	AC220V,10A
Multiple Safety Protection Devices	Current discharge protection, over pressure protection,over temperature protection, over load fuse protection
Accessories	Testing Salt/ Measuring tank/ Equipment  each 1 set
Salt Spray Resistance tester Standard	CNS: 3627, 3385, 4159, 7669, 8886; JIS: D0201, H8502, H8610, K5400, Z2371; ISO: 3768, 3769, 3770; ASTM: 8117, B268

     3. Systems:   •Heating system It uses steam heating, heating speed, reduce the standby time, when the temperature reached, the thermostat automatically switches the state, the temperature accuracy, less power consumption    •Control system High-precision temperature controller, Japan OML timer to control the time, the overall temperature error of ± 1°c