RTV2 Silicone Rubber for Craft Mold Making

Specifications

reproduction of poly resin  epoxy, PU foaming resin, polyamine resin 
RTV2 silicone rubber for craft mold makingPU Mold making silicon


RTV2 silicone rubber for craft mold making Characteristics and Application: 
This series is a condensation type and double-component material, including A component and B component, with the features as good flow ability, resistant to high temperature and corrosive, high anti-tensile strength and anti-tearing strength, low shrinkage, many mould-reproduction times. This mould silicone rubber is widely used in the reproduction of poly resin, epoxy, PU foaming resin, polyamine resin decorative article and craftwork.
 
Product Data:
How to Use:
1.Weigh a certain amount of silicone rubber, and then add curing agent by 2%-3% of silicone rubber. Ensure that all the silicone rubber is used in short time.
2. Fully stirring the silicone rubber, then put them in vacuum and pump 3-5 minutes, make moulds after bubbled.
3. Curing speed is closely related to the temperature and humidity, the higher the temperature and humidity, the faster the curing. Customers can choose curing agent or adjust the amount of curing agent in order to reach appropriate curing speed according to the weather.


Package, Storage, Transportation and Notes
1.The products are packed in 200 kg, 25kg, 5kg, and 1kg per barrel, and the curing agent is packed in 0.75L per plastic bottle.
2. The products should be sealed and deposited in a shade, dry place to prevent rain, sunlight exposure. 3. The storage period is six months. If the viscosity increases, stir the rubber uniformly before use, and property unchanged.
4. If the products are used in the reproduction of glass, ceramic, resin, wood etc., or the surface painted, coat the surface of prototype with surfactant ( such as detergent, shampoo or soapy water) uniformly, and perfuse or brush silicone rubber after water volatilized, which is easier for mould unloading.
5. The products are non-dangerous goods, avoid skin and eyes contacting with the curing agent in processing. Once exposed, immediately wash with certain detergent and water. If splash into eyes, should wash with flowing water at least 15 minutes and consult a doctor.