PZ-3 gunite machine

PZ-3 gunite machine

Product Introduction

PZ-3 Dry explosion gunite machine, whether it is wild jet slope, or building wall reinforcement, can meet your needs, building gunite machine, slope used spraying machine , dry shotcrete machine, tidal spray material pulp, the requirements of the medium is not very high, as long as a diameter of 20mm or less, can be injected.

Shotcrete is the use of compressed air, a certain proportion of the concrete mixing plant will feed through pipelines and high-speed jet setting and hardening the surface to be sprayed to form concrete support layer. In recent years, shotcrete technology with a simple process, a unique effect, the economic cost and fast construction speed, construction, rail and road tunnel construction, mine development, slope reinforcement and other fields widely used.

Usage

PZ-3 Dry explosion gunite machine, whether it is wild jet slope, or building wall reinforcement, can meet your needs, building gunite machine, slope used spraying machine , dry shotcrete machine, tidal spray material pulp, the requirements of the medium is not very high, as long as a diameter of 20mm or less, can be injected.

Feature

(1) Through rotor chamber no binder , the material smooth, efficient and time-saving;

(2) Four point elastic compensation compression, good sealing effect, little dust next machine,wearing parts with long life ;

(3) Using low pressure high speed vortex air transport, overcome the bonding of material handling, plugging away from the pack and pulse problems, material flow uniform, continuous and stable.

(4) New nozzle, discharge elbow device, to improve spray deposition, less resilient, high quality shotcrete.

Maintenance and repair

(1) After finish work, be sure to clean the machine;

(2) Check all parts of the fastener, particularly the bolts on vibration hopper ;

(3) If have problem on welded connections, timely treatment;

(4) The material chamber inside the machine , cyclone elbow, sleeve,though having a certain release, but after finish work,also should check the clean-up, timely replacement of wearing parts.