PVC Non- slip bath tub treads

PVC Non- slip bath tub treads  

Technical Data(bath series)
Composition
Backing	PVC plastic and so on, thickness of 0.5-1mm
Base paper	Release paper of 100g
rear glue	solvent-based acrylic pressure-sensitive adhesive (30 um dry adhesive thickness);
Produce goods	All kinds of printing patterns
Technical data
The early adhesive force	5.0 N/25mm
Adhesion force	10 N/25mm
Tensile strength	0.6 kgf / mm
Application temperature	-20-100°C
Chemicals corrosion-resistant	good
wear-resistant number	more than 100,000, resistance
weather-resistance	more than 2 years

   Directions   Important: apply above 10°C. Clean and dry surface thoroughly. Remove backing and press to surface working towards edges.   Do not apply in areas that are continuously under water such as swimming pools or spas.   To clean, wipe occasionally with detergent.   Removal: to remove strip, lift corner and slowly peel back. Residue can be removed with general household cleaner.    Application
 
Useful for baths, showers, wet rooms and boats.   We recommend applying the aqua floor tape in strips to create a ladder type effect.  Also very practical for applying on walking areas on boats and food preparation areas in restaurants, or at home.