Prices conductive Liquid potting silicon/silicon rubber

Prices conductive Liquid potting silicon/silicon rubber    Introduction of Prices conductive Liquid potting silicon/silicon rubber : Liquid silicone rubber is translucent,addition type and two component with short curing times. Suitable for the production of all kinds of precision molds. Suitable for the production of LED flexible strips.   Data sheet of  Prices conductive Liquid potting silicon/silicon rubber:

Item	Mixing Ratio	Color	Hardness (Shore A)	Viscosity (mPa·s)	Working Time (25℃)	Curing Time (25℃)	Thermal Conductivity [W/(m•k)]	Volume Resistivity  (Ω•m)	Flame-retardant Level	Shrinkage (%)
OTT-D8105	1:1	transparent	5±2	800±500	60-120mins	6-12h	0.2-0.3	1013-1014	V-2	≤0.1
OTT-D8110	1:1	transparent	10±2	800±500	60-120mins	6-12h	0.2-0.3	1013-1014	V-2	≤0.1
OTT-D8115	1:1	transparent	15±2	500±200	60-120mins	6-12h	0.2-0.3	1013-1014	V-2	≤0.1
OTT-D8120	1:1	transparent	20±2	500±200	60-120mins	6-12h	0.2-0.3	1013-1014	V-2	≤0.1
OTT-D8125	1:1	transparent	25±2	500±200	60-120mins	6-12h	0.2-0.3	1013-1014	V-2	≤0.1

    Feature of Prices conductive Liquid potting silicon/silicon rubber  : Curing at room temperature
Easy defoaming
Nontoxic and harmless
Good air permeability
Heat &weather resistance.   How to use of Prices conductive Liquid potting silicon/silicon rubber : Mix ratio:  A:B=1:1  1.Defoaming the mixed-well materials (A/B) completely and then drop the rubber materials onto the LED strips by machine or by hand.   2.Place the strip quietly for 6 hours( 25°C),then you will get the tack free.for fully cured,24 hours is enough.   Storage of Prices conductive Liquid potting silicon/silicon rubber  : Seal stored in shady, cool, dry and ventilated places Temperature for storage:0~37°C Collection and storage the silicone rubber with the containers of galvanized metal, polyethylene or polypropylene    Package of Prices conductive Liquid potting silicon/silicon rubber :   5 Kg /drum,25 Kg/drum,200Kg/drum.   operation Note:  1.Separate or wipe clean the tools of part A,B before use , or it may cause the product can’t working normally because of the A&B mixed and local agglomeration 2.The effective operating time is 20 minutes at 25°C after the uniform mix between part A&B 3.During the rubber operation, avoid contact the compounds which contains the N, S, P, Sn, etc, or it will cause incomplete curing or not curing. 4.Add the thinner appropriately if the viscosity is too large for practical use.But not more, otherwise it will affect the product performance and cure rate.     Products show:     Packing & shipping of prices conductive Liquid potting silicon/silicon rubber :   Company information:   OTT New Material Co., Ltd. was founded in 2014, and is located in Guangzhou, Guangdong. We are a leading professional silicone material manufacturer, integrating the R&D, production and sales. Main products are Condensation molding silicon rubber, Addition molding silicone rubber, Addition electronic potting silicone rubber, Condensation electronic potting silicone rubber, leather printing roller silicone rubber, LED strip light silicone rubber, human casting silicone rubber, etc over hundreds kind of silicone rubber and related products. Our customers are from all over the world. If you are interested in our products, please feel free to contact us for further information.     Your Benefit is Our Concern! Contact: Ms Alma Phone: 86-020-86819712
Skype : ottsilicone_alma(at)163(dot)com
Mobile & Whatsapp: +86 15360071726 Fax:86-020-86812232  Website: www(dot)ottsilicone(dot)com