Product description
High efficiency collector
Rock wool/glass fiber/PU
Certifications: Keymark and CE
Features:
- Can be matched with any low pressure, high pressure hot water system
- Use heat pipe for heat conduction and can get high heat absorption efficiency and rapid heat transfer
- Easy plug-in design and installation
- Corrosion-resist aluminium manifold and frame
- Optional 38/45° frame can resists wind with velocity of 36mps
- Can supply hot water to large amount water needed
- Economical for hotel, school, domitory, hospital and tall high buildings
- Material of heat pipe solar collector
- Manifold channel: 0.8mm thickness red copper
- Manifold outer: 2.0mm thickness aluminum alloy
- Tube size: 58 x 1.800mm
- Insulation layer: 40 to 45mm thickness rock wool/polyurethane foaming
- Hail resistance: 25mm
- Maximum pressure: 6bar
- Frame: 1.5 to 2.0mm thickness aluminum alloy
- Connections: 1/2-, 3/4- and 1-inch male thread
- Collector packing: bubble film wrapped and carton box
- Use heat pipe collector to supply hot water
- Can work under certain pressure and supply water to high and far place
Specifications:
- Inner manifold material: red copper channel
- Outer shell material of manifold: aluminium alloy
- Frame material: aluminium alloy
- Heat pipe material:
- 99.93% pure cooper and lead-free
- 45% silver brazing
- Rubber seals and rubber rings: HTV grade silicone rubber
- Optional installation angle: 0, 30, 38 and 45°
- Maximum operating pressure: 12bar
- Optional flow rate: 0.1L/min/tube (0.026g/min/tube)
- Vacuum tube:
- Ø47 to 1500mm
- Ø58 to 1800mm with heat pipe
- Daily efficiency: ≥55% (≥42% in winter)
- Hailstone resistance: Ø≤25mm
- Heat pipe anti-freezing: ≥-35°C
- Lifespan: approximately to 15 years
Can be matched with any low pressure, high pressure hot water system
Use heat pipe for heat conduction and can get high heat absorption efficiency and rapid heat transfer
Easy plug-in design and installation
Corrosion-resist aluminium manifold and frame
Optional 38/45° frame can resists wind with velocity of 36mps
Can supply hot water to large amount water needed
Economical for hotel, school, domitory, hospital and tall high buildings
Material of heat pipe solar collector
Manifold channel: 0.8mm thickness red copper
Manifold outer: 2.0mm thickness aluminum alloy
Tube size: 58 x 1.800mm
Insulation layer: 40 to 45mm thickness rock wool/polyurethane foaming
Hail resistance: 25mm
Maximum pressure: 6bar
Frame: 1.5 to 2.0mm thickness aluminum alloy
Connections: 1/2-, 3/4- and 1-inch male thread
Collector packing: bubble film wrapped and carton box
Use heat pipe collector to supply hot water
Can work under certain pressure and supply water to high and far place
Inner manifold material: red copper channel
Outer shell material of manifold: aluminium alloy
Frame material: aluminium alloy
Heat pipe material:
- 99.93% pure cooper and lead-free
- 45% silver brazing
Rubber seals and rubber rings: HTV grade silicone rubber
Optional installation angle: 0, 30, 38 and 45°
Maximum operating pressure: 12bar
Optional flow rate: 0.1L/min/tube (0.026g/min/tube)
Vacuum tube:
- Ø47 to 1500mm
- Ø58 to 1800mm with heat pipe
Daily efficiency: ≥55% (≥42% in winter)
Hailstone resistance: Ø≤25mm
Heat pipe anti-freezing: ≥-35°C
Lifespan: approximately to 15 years
99.93% pure cooper and lead-free
45% silver brazing
Ø47 to 1500mm
Ø58 to 1800mm with heat pipe