PP fiber wholesale concrete pp fiber

Polypropylene fiber(3-25mm)   Features of monofilament: 1) no agglomeration and easily spreads around in mortar or concrete, Guaranteeing the property of crack resistance effectively 2) convenient applying: No need to change the proportion of mortar, and Just put the fibers into the mortar mixture and stir for a moment after Adding water. 3) fine economic property. 4) the fiber has stable chemical property, strong acid and alkali resistance, and can be used in any engineering projects.   Suitable engineering for polypropylene monofilament: 1) be suitable for the waterproof layer, floor, inner/outer wall of industrial and construction. 2) increases cracking resistance on the surface of industrial workshop,warehouse and parking. 3) increases cracking/seepage resistance of the ground in natatorium, swimming pool, pond and ditch. 4) be suitable for any mortar projects and fine aggregate concrete projects.   Application instructions: 1) compound amount: To resist the common cracks on surfaces,0.9-1.5kg/m3 fibers to cement paint are enough, and for reinforced application 0.9-1.8kg/m3 are enough; 12-19mm polypropylene fiber is suitable for the use of concrete;and 6-9mm for motar. 2) stirring requirement: The proportion of cement, sand and aggregate is No need to be changed. Put cement, aggregate, additive and fiber together, Then stir after adding enough water (do not stir without water) and time For stirring can be prolonged for 2- 3 minutes in order t   Specifications: 1) raw material: Polypropylene 2) crack elongation:15 - 20% 3) fiber type: Monofilament 4) fiber diameter:0.02 +/- 0.005mm 5) melting point:160-170 centigrade 6) density:0.85-0.93g/cm3 7) acid/alkali resistance: Strong 8) tensile strength (mpa):7.54-7.78cn/dtex     Hope to serve you soon.