Positive Sealing MECAIR Type Pulse Valve Diaphragm DB112

Positive Sealing MECAIR Type Pulse Valve Diaphragm DB112

The diaphragm is also called the pulse valve diaphragm. The pulse valve diaphragm is a whole piece of high-quality rubber diaphragm formed by the riveting head of the outlet of the compressed air pipeline or the plug valve, the discharge and unloading hole and the bolt hole with fixed support around it, which is the key control component of the electromagnetic pulse valve. Pulse valve diaphragm is one of the components in the normal operation of the valve body and the "switch" of the jet path of the dust removal system of the pulse bag filter.

The pulse signal is input into the coil in the electromagnetic body through the wire. The pulse valve is controlled by the output signal of the pulse injection control instrument. The pressure change of the two air Chambers before and after the valve makes the rubber diaphragm flex to realize the opening and closing of the pulse valve. The diameter of the rubber diaphragm determines the travel size of the rubber diaphragm and the speed of opening and closing. The larger the diameter of the diaphragm is, the larger the travel will be and the better the spray performance will be.

Not only this type,but also other items can be available

Refer to Pulse Valve Description

The Working Principle of Electromagnetic Pulse Valve

Input the positive pulse signal to the coil in the electromagnetic body through the wire, and the working flux generated by the coil will make the moving core attract and open the valve. When the positive pulse signal input is stopped, the moving core is released, and the moving core returns to the initial state under the action of spring force. In addition, the valve is self-maintained, which can be maintained after the positive pulse input is stopped or the power is cut off. Only when the negative pulse signal is input can it be reset. Pulse solenoid valve working principle, is the use of electrical pulse into mechanical pulsation, make pulsating gas powerful energy into momentum, release in a short time to produce great momentum, with PLC control of its pulse interval should be determined according to the rated gas pressure recovery time.

Usage of Pulse Valve

Generally installed in the main oil road or shock absorber back pressure oil road, in the transmission automatically up and down the moment or in the lock clutch lock lock and release the lock start to make the oil pressure drop, to reduce the shift and lock unlock impact, make the vehicle run more balanced.

Its role is to control the oil pressure in the oil route.

If you are interesting,pls contact us without any hesitation