polyurethane casting resin /pu chemical for shoe sole A-5005/B-ZH5002 Shop sign: ZG-P-5005/ZG-I-5002 Medium and high-density PU Resin for shoe sole with the upper 1. Characteristic:Medium and low hardness, medium and high density 2. Application:Applicable to the production of shoe sole with the upper for men and women 3.Typical properties of PU Resin
Name of products | Appearance | Viscosity (Pa·s/50°C) | Density (g/cm3/40°C) | Package (kg) |
ZG-P-5005 | White or pale yellow, liquid, no foreign material | 0.60-0.90 | 1.16-1.20 | 18 |
ZG-I-5002 | Transparent liquid, no foreign material | 0.20-0.40 | 1.18-1.20 | 20 |
Reference shipments ratio: A/B=30/24 (barrel) 4. Catalysts and auxiliary agents: ZG-P-5005/ZG-AC-2/water =18kg/235g/0-30g Note: corresponding adjustment should be made to the addition of auxiliary agent at different areas, different environment and different production conditions. 5. Molding conditions & physical properties:
Reactivity | Technical index | Test item | Reference physical properties |
Reference ratio P+C/I | 100/70-74 | Molded density (g/cm3) | 0.55~0.60 |
Using temperature(°C) | A material: 45-50; B material:38-42 | Hardness (type A) | 40~50 |
Cream time(s) | 7~9 | Tensile strength(MPa) | 6.0~8.0 |
Rise time(s) | 30~45 | Elongation(%) | 350~450 |
Metal mold temperature (°C) | 45~55 | NBS abrasion resistance(%) | ≥10% |
Demould time (min) | 1.5~3.0 | Free foam density (g/cm3) | 0.25~0.30 |
| | Folding endurance (room temperature) (40,000 gap length mm) | <8 |
--Matching ratio is based on the optimal matching value which will vary with the category and additive amount of paint additives added. --Free foam density will vary with the seasons (temperature, humidity). --Stripping time will be extended with the increase of the thickness of moldings. --Folding endurance conditions: bending angle is 90 degrees and the frequency is 80 times / min * 40 thousand times --Data listed above is just for reference. The specific data is subjected to the practical operation. If other physical properties are required, please contact us.