NAIKE Plastic Pall Ring is versatile. This product was advanced on the basis of Plastic Rasching Ring, and compared with it, both of them have similar cylindrical dimensions but the Plastic Pall Ring has two rows of punched out holes, with fingers or webs turned into the centre of the cylinder, which significantly increases the performance of the packing, in terms of throughput, efficiency and pressure drop.
PP Pall Ring Packing Specification
Technical Parameter
D×H×δ mm
Specific area m2/m3
Void Rate %
Bulk Number g/m3
Package Density (kg/m3)
F factor m-1
16*16*1
188
91
170000
85
275
25*25*1.2
175
90
53500
69
239
38*38*1.4
115
89
15800
63
220
50*50*1.5
93
90
6500
52
127
76*76*2.6
73.2
92
1927
41
94
100*100*3
52.8
94
1000
32
82
Physical & Chemical Properties
Performance/Material
PE
PP
RPP
PVC
CPVC
PVDF
Density(g/cm3)
0.94-0.96
0.89-0.91
0.93-0.94
1.32-1.44
1.50-1.54
1.75-1.78
Operation Temp(℃)
90
>100
>120
>60
>90
>150
Chemical Corrosion resistance
Good
Good
Good
Good
Good
Good
Compression Strength(MPa)
>6.0
>6.5
>7.0
>6.0
>8.0
>10.0
Advantage of Polypropylene Pall Rings
This pp pall ring packing has high Free Volume
Low-Pressure Drop
The random tower packing has low mass-transfer unit height
High flooding point
Small specific gravity
High mass transfer efficiency
Application of Plastic Scrubber Packing
As a tower packing manufacturer, Naike is able to offer plastic pall ring for different usages.
Absorbers
Degassing
Liquid/liquid extraction
Water treatment
Heat transfer.