PET Tape Wrapping Vacuum Insulation Panel

Vactherm VIP is an evacuated insulation panel with very low thermal conductivity. The core of the panel consists of a amorphous silicon dioxide powder and a inorganic opacifier, coated with a polyester fleece as dust shield and is sealed under vacuum into a metallized high barrier foil. The high barrier foil is covered on the exterior with a black protection fleece

Specification
• Surface color: Grey
• Core materials: Silicon dioxide powder, inorganic opacifier, fiber 
• Weight per area: ca. 180 kg/㎡ (20 mm thickness, U-value 0.25 W/m²K)
• Density : 180 up to 210 kg(m³)
• Thermal conductivity 
Initial value: < 0.0045 W/mK
including aging and edge losses: 0.0080 W/mK
• Internal gas pressure : 0.5 to 3 mbar (at delivery)
• Operating temperature: -80 to +80 °C
• Operating humidity: 0 to 60%
• External pressure load (@ 10% compression): > 150 kPa
• Dimension: 1400 mm x800 mm x 60 mm (max.),
• Length and wide tolerance: +5 / -5 mm
• Thickness tolerance: +/- 1 mm

The vacuum insulated panel should be protected from high temperature and humidity, because these may decrease the lifetime of VIPs. Even at low temperature constant
high humidity has to be avoided on the panel surface. Use no alkaline, aqueous building adhesives since these drain badly and endanger the seal seams.

Insulation Panel, VIPs Panel, Fumed Silica Panel, Fumed Silica VIPs, Building VIPs, Architecture VIPs, Contruction VIPs, Pyrogenic Silica VIPs, Pressed Powder VIPs, Silica Based Pressed Powder VIPs, Silica Based  Powder VIPs