General:
ZHW2-12 Outdoor AC HV Metal-clad Ring Main Unit Switchgear
(hereafter referred to as Outdoor Ring Main Unit) is suitable for
Outdoor distribution network of cable incoming and outgoing line with AC
50Hz, 12 kV rated voltage. It is widely used in the industrial zone,
residential area and commercial centers. As switchgear of RMU Power
supply or terminal power supply, it can break load current and break the
short circuit current by fuse. It is specialized in the power grids
free of maintenance and with high degree of automation. This outdoor
Ring Main Unit has replaced the regular switching station and it cuts
down the occupied area of outgoing cable largely and the cost as well as
reducing the loss of the cable.
Product feature:
A. This product has two structures. One is that the outdoor RMU is
mounted with vacuum load switch and load circuit breaker made by
ourselves. It is resembled by weld and bent corrosion resistance plates.
And smooth rotating doors are fitted on the incoming and outgoing
terminals (please open the door from down to up and close or open the
door on the side from up to down). While opening the door, the incoming
and outgoing line units and operating units of RMU can be seen. The
incoming and outgoing line units are connected with cable connectors and
bushings, and the bushing are fixed under the operating panel, which
makes it easy to connect with cable. The operating mechanism is fixed in
the front of the face plates in order to make the motor-drive operation
easy. The main components inside the RMU Switchgear are vacuum load
switch and vacuum circuit breaker, which can control and protect the
incoming line and the outgoing line. The user can choose the combined
mode according to what they need. The typical scheme is two outgoing
lines and two incoming lines (composed of four main switches). At the
same time, the current transformer, voltage transformer and lightning
arrestor and other elements are able to be fitted.
B. Another structure is that the outdoor RMU is fitted in imported SF6 RMU, product feature is:
It is feature by compact structure, small size, less occupied area
and fine looking. The body is made of compound plates and the ceiling is
made of glazed tile. There is a RMU imported from Germany, the origin
place, which has the characteristics of seal, insulation, high
reliability and being free of maintaining. The internal malfunction
electric arc restraint device is fitted in the RMU, which can provide
the greatest level of protection for personnel and equipments. It is
easy to alternate the fuse for the SF6 RMU. When the fuse melts, it
sends mechanical indication signal. The fuse'dimension is complied with
IEC Standards and it has remote control joints, interlock of earthing
switch. The function of mechanical interlock is complete, simple but
reliable (complied with "Five protection"requirement) and can prevent
varieties of incorrect manipulation, besides it is in conformity with
GB3906-1991 and GB11022-1999 requirement. The dimension requested in the
scheme of "two incoming line and one outgoing line"scheme,
1400*900*1630( width*depth*height).