1 / 6
Model No. : | X400 400W marine wind generators |
---|---|
Brand Name : | Newmeil |
Product description
Model name | IDEAL400 |
Model number | X-400 |
Wind turbine type | Horizontal axis, up-wind |
Rotor diameter | 1330mm |
Net weight | 7.8 kg |
Tower diameter | 48-50 mm |
Blades number | 3 |
Blades material | Caron fiber reinforced plastic |
Blades mass | 300g /pcs |
Body material | Aluminum high pressure diecast |
Body construction | Completely one |
Product finish | Clamp-based Thermosettmg powder coating |
Tower connection | bolt-on clamp |
Start up wind speed | 2.5 m/s |
Cut in wind speed | 3 m/s |
Survival wind speed | 50m/s |
Rated power | 400W (12 m/s) |
Rated rotor speed | 700 rpm |
Maximum power | 500W (16m/s) |
Working temp. range | from -40℃ to 60℃ |
Product life (years) | 15 |
The sound pressure level | LAeq 35dB @ 5m/s @ 5m behind rotor (an air density of 1,225 kg/m³) |
Generator | Synchronous-type, three-phase power generator with neodymium iron boron magnets |
Rated output voltage | Off grid 12V or 24V |
Braking system | Electro-magnetic & blade over speed aerodynamic braking system |
Yaw control | 360 degree free yaw |
Direction control | Tail tracing |
Control system | Brake mode |
Sfty control | |
Recommended system | Off grid: deep cycle lead acid battery |
Note: At cut-in wind speed, it produces power, but it requires higher wind speed to charge battery or transfer to grid |
Model name | IDEAL300 | IDEAL400 | IDEAL600 | IDEAL2000 |
Model number | X-300 | X-400 | X-600 | X-2000 |
Rated power | 100W | 400W | 600W | 1500W |
Rotor diameter | 900mm | 1330mm | 1850mm | 1900mm |
Number of blades | 5 | 3 | 3 | 5 |
Start up wind speed | 1.8m/s | 2.5m/s | 2m/s | 1.8m/s |
Cut-in wind speed | 2.5m/s | 3m/s | 2.5m/s | 2.5m/s |
Survival wind speed | 50m/s | 50m/s | 50m/s | 50m/s |
Maximum power | 300W | 500W | 700W | 2000W |
Rated rotor speed | 700rpm | 800rpm | 800rpm | 750rpm |
Rated output voltage | DC 12V / 24V | DC 12V / 24V / 48V | DC 12V / 24V / 48V | DC 48V / 110V /200V |
Net weight | 7kg | 7.5kg | 15kg | 24.5kg |
Wind turbine type | Horizontal axis, up-wind | |||
Blades material | 20% -30% carbon fibre reinforced plastic | |||
Body material | High pressure aluminium die casting | |||
Working temperature range | From -40℃ to 60℃ | |||
Generator | Synchronous type, three-phase power. generator with neodymium magnets Double copper winding | |||
Braking system | Electro-magnetic & blade over speed , aerodynamic braking system | |||
Yaw control | 360° free yaw |
Send your inquiry to this supplier