Mycotoxin Rapid Test AFB1-P

Specifications It provides a semi-quantitative method to detect the Aflatoxin B1 above 5 ppb in feed or grain samples.

Aflatoxin B1 - Precise Rapid Test
Cat No.: W81039-1  
1. INTENDED USE Quicking Aflatoxin B1 Rapid Test is a competitive immunoassay for the semi-quantitative detection of the presence of Aflatoxin B1 residue in feed, grain or spices samples.
Cut-off: 5 ppb base
Assay Time: 5 - 10 min
Sample: Feed, grain or spices extraction
2. PRINCIPLE OF THE ASSAY Quicking Aflatoxin B1 Rapid Test is based on competitive lateral flow immunochromatographic assay. The Aflatoxin B1 conjugate in the test zone will capture the immuno-gold (colloid gold-AFB1 antibody conjugate), when there is very little dissociative AFB1 in the extraction. A visible red test band indicates a negative result when the control band (C
zone) shows that the card is valid. The test band (T zone) will be not visible if AFB1 is present in concentration of the cut-off value and above which explains a positive result.   3. KIT COMPONENT - 10×foil pouches, each containing one AFB1 cassette with a pipette and a desiccant
- 1×assay diluent (50 mL)
- 2×centrifugal tubes (15 mL)
- Products Manual
4. TEST PROCEDURE - Grind a representative sample to the particle size of fine instant coffee (50% passes through a 20 mesh screen). Weigh out 2.0 g ground portion of the sample into the centrifugal tube (15 mL).
- Add 2 mL of water and 8 mL of ethyl acetate into the tube. Shake for 5 min. (If emulsification appears, do a centrifugation at 4000 rpm for 1 min.)
- Collect accurately 2 mL of supernatant (ethyl acetate layer) into a small container (beaker or tube). Dry the liquid by blowing wind.
- Redissolve the residues in the small beaker with an amount of the provided assay diluent. (REF: Table )
  - Take out the cassette from the foil pouch and place it horizontally.
- Suck the liquid and drip 3 drops into the assay sample hole.
- Interpret the result in 5 - 10 minutes. Result after 10 minutes is only considered as reference.
5. INTERPRETATION OF RESULTS  
Positive: Only one clear band in C zone indicates a positive result. Positive shows that the concentration of Aflatoxin is at or above 10 ppb in the samples.
Negative: The presence of both bands in C zone and T zone.
Invalid: No band appears in C zone.
6. STORAGE
The kit can be stored at room temperature (2-30°C). The test kit is stable through the expiration date (18 months) marked on the foil pouch. DO NOT FREEZE. Do not store the test kit in direct sunlight.
7. PRECAUTIONS
- For best results, please strictly adhere to these instructions.
- All reagents must be at room temperature before running the assay.
- Do not remove test cassette from its pouch until immediately before use.
- Do not reuse the test kit.
- Do not use the test beyond its expiration date marked on the foil pouch.
- The components in this kit have been quality control tested as standard batch unit. Do not mix components from different lot
numbers.
8. LIMITATION Quicking Aflatoxin B1 Rapid Test is an useful tool offering a rapid and accurate testing in field screening, exceeding with its convenience. It provides a semi-quantitative method to detect the Aflatoxin B1 above 5 ppb in feed or grain samples. If you want a quantitative result, please adopt other method such as ELISA/ HPLC in practice.