MNS metal-clad enclosed switchgear The KYN28A-12 Metal-clad Switchgear is a kind of draw of metal-enclose switch cabniet for inindoor use, and it suits for 3-10kv, 3-phase, 50Hz single busbar and busbar section. The high voltage switchgear is primarily utilized for three purposes as listed below. Power distribution for the enterprises, mining plants and manufacturing plants. Power receiving and distribution for secondary power substations, Start up of large-sized, high-voltage moter.etc. Working Condition: Ambient air temperature :-5 -40°C within 24 hours(-25 -+45°Cavailable as customized products). Rates cuurenty:3150A. Altitude: ≤4000m Relative humidity: Daily average Relative humidity ≤95%. Reated voltage: 3.6 7.2 12KV. Reated frequency:50HZ.
Technical specification of KYN28-15 switchgear
Item | Unit | Data |
Rated voltage | kV | 3.6, 7.2,12,15 |
Insulation level | Rated power-frequency withstand voltage(1min) | kV | 50 / 55 (phase to earth / across open contacts) |
Rated lightening impulse withstand voltage | kV | 95/ 110 (phase to earth / across open contacts) |
Rated frequency | Hz | 50 / 60 |
Rated main bus bar current | A | 630,1250,1600,2000,2500,3150 |
Rated branching bus bar current | A | 630,1250,1600,2000,2500,3150 |
4s Short-time withstand current(rms.) | kA | 16, 20, 25, 31.5,40,50 |
Peak withstand current(peak.) | kA | 40, 50, 63, 80,100,125 |
Protection Level | | P4X (IP2X when circuit breaker chamber open) |
Stardard | | GB311.1-1997 |
FAQ Ordering information: Please specify the following information when ordering 1. The full model ,including main circuit plan and auxiliary circuit plan. 2. The diagram of main circuit system allocation 3. Inner allocation diagram of the switchgear 4. Electric diagram of auxiliary contact 5. Name, model, specification and list of adopted components 6. Customized products are available.