Medical equipment &HVAC use remote temperature and humidity sensor HTU20D

                              HTU21D(F) RH/T Sensor IC          Digital Relative Humidity sensor with Temperature output   Base information  :   (1) DFN type package (2) Relative Humidity and Temperature Digital Output, I²C interface (3) Fully calibrated (4) Lead free sensor, reflow solderable   Low power consumption (5) Fast response time      FEATURES   (1) Full interchange ability with no calibration required in standard conditions   (2) Instantaneous desaturation after long periods in saturation phase  (3) Compatible with automatized assembly processes, including Pb free and       reflow processes (4) Individual marking for compliance to stringent  traceability requirements   APPLICATIONS  (1) Automotive: defogging, HVAC  (2)  Medical  (3) Humidifier  (4) Printers  (5) Home Appliance  (6)  Low power consumption 's Intelligent wearable device,  (7) tablet PC,  (8) handheld instrument with high measuring accuracy ,  (9) temperature and humidity transmitter in Computer room monitoring ,  (10) temperature and humidity recorder in Cold chain transportation and warehouse monitoring          Description   The HTU21D(F) is a new digital humidity sensor with temperature output by MEAS. Setting new standards in terms of size and intelligence, it is embedded in a reflow solderable Dual Flat No leads (DFN) package with a small 3 x 3 x 0.9 mm footprint.   This sensor provides calibrated, linearized signals in digital, I²C format. HTU21D(F) digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM  applications where reliable and accurate measurements are needed.   Direct interface with a micro-controller is made possible with the module for humidity and temperature digital outputs. These low power sensors are designed for high volume and cost sensitive applications with tight space constraints.     Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Low battery can be detected and a checksum improves communication reliability.   The resolution of these digital humidity sensors can be changed by command (8/12bit up to 12/14bit for RH/T). With MEAS’ improvements and miniaturization of this sensor, the performance-to-price ratio has been improved – and eventually, any device should benefit from its cutting edge energy saving operation mode.     Optional PTFE filter/membrane (F) protects HTU21D digital humidity sensors against dust and water immersion, as well as against contamination by particles. PTFE filter/membranes preserve a high response time. The white PTFE filter/membrane is directly stuck on the sensor housing.