Mechanical encoder GHS28 series mini encoder

Specifications 1)Small size, light weight, and excellent performance

2)has a higher stability and protection

3) 10 ~ 3600 pulses Optional

  Solid shaft incremental rotary encoder- GHS28 series   Features:               l  ASIC devices internal, good reliability, long life, anti-jamming performance.   l  Stainless steel shaft has a higher stability and protection.   l  Metal shell is more solid and anti-impact.   l  Outlet end use waterproof metal interface protection.   l  Bearing load heavy, anti-oil and water.   l  Applicability to a wide variety of mechanical and industrial control.   l  Resolution up to 3600 pulse.   l  10 ~ 3600 pulses Optional: (Other pulses available on request)   Model defined:       

GHS28       10               1024                   3                 D                    P                         GR
Outer Diameter Ø 28mm	Shaft Diameter6mm	Resolution 10~3600 pulse optional	Phase 2=A/B 3=A/B/Z 6=A/B/Z/A-/B-/Z-	Work voltage A=5VDC RS422 D=10~30VDC	Output signal R=RS422 P=Push-pull O=Open-collector V=Voltage L= linedriver	Outlet GR= cable side	Custom

      Electrical Characteristics:  

Output circuit	Open-collector output	Voltage output	Push-pull complementary outputs	driver
Supply voltage	5~30V	5~30V	5±0.25 5~30V	5±0.25 5~30V
Current consumption	≤80mA	≤80mA	≤80mA	≤150mA
Load current	40mA	40mA	40mA	60mA
Output high	Min Vcc*70%	Min Vcc-2.5V	Min Vcc-1.5V	Min 3.4V
Output low	MAX 0.4V	MAX 0.4V	MAX 0.8V	MAX 0.4V
Rise time Tr	MAX 1us	MAX 1us	MAX 1us	MAX 200ns
Fall time Tf	MAX 1us	MAX 1us	MAX 1us	MAX 200ns
Highest frequency response	300kHz	300kHz	300kHz	300kHz

      Mechanical properties:  

Max speed r/min	Starting torque	Axis maximum load	Impact	Anti-vibration
6000	<0.05Nm	Radial 20 N Axial 10 N	50G/11ms	10G 10-2000Hz
Moment inertia	Work Temperature	Storage Temperature	Protection Degree	Weight
4 x 10.-6kgm²	-30~85ºC	-40~95ºC	IP54	100g

     Dimensions:       Note: The above dimensions are for reference only, the size of all the encoder refer to the encoder attached in instructions.   Mechanical mini encoder   Mechanical coder     If you are interested in the above, please no hesitate to contact us!