Magnetic Drilling Inclinometer

Magnetic Drilling Inclinometer Product Description   1. Product Introduction    This set of product can not only measure the data of well inclination, magnetic azimuth, tool face etc of a certain section of the well trajectory, but also can be used for measuring these data of a specific measuring point at the well bottom, which is widely used in the measurement of the well trajectory during drilling in oil, geologic, coal and water conservancy industries etc.     2.Suitable well conditions:   Minimum inner diameter of drill tools>57mm Downhole temperature<125℃ Downhole pressure<120MPa                                                                                                                         3.Technical Parameters  

Item	Measurement Range	Precision
Well Inclination	0~180°	±0.10°,±0.15°
Magnetic Azimuth	0~360°	±1.0°,±1.2°(Inclination≥6°)
High-side tool face	0~360°	±1.0°,±1.2°(Inclination≥6°)
Magnetic tool face	0~360°	±1.0°,±1.2°(Inclination≤8°)
Time-delay range	2~300min
Time-invertal range	12~3600s
Collecting points	3600 point
Temperature of Probe-tube	-40~125℃
Temperature of the whole instrument	Assembled with thermal insulation protecting component, the highest working temperature is 260℃.

  4.  Product Features of Multi-shot Inclinometers 1)Precise measurement, reliable stable performance: Equipped with shock proof accelerometer, the probe is featured with high linearity, small temperature drift, good repeatability and other characteristics, thus can ensure precise measurement data.   2)Particular Power-off protection:This function allows the instrument to continue work normally even if there is a sudden outage caused by special strong vibration or impact.   3)Low power consumption design, long working hours:With the low power consumption design, a fully charged battery can guarantee a continuous working for more than 80 hours.   4)Good resistance to impact and vibration:The instrument is radially and axially equipped with multistage buffering devices, such as rubber, springs, hydraulic anti-seismic shock absorber, which effectively improves the impact resistance as well as the vibration resistance of the instrument.   5)Allow various measuring methods, wide adaptability:The same probe-tube can be used for multi-point as well as for fixed-point measurement. Equipped with different downhole protecting system, it is available for self-floating measurement, suspending measurement and dropping measurement. It is very easy for the drilling teams to manage the instruments and reduce their purchasing cost.   6)Available for high temperature measurement and deep well measurement:Assembled with the thermal insulation component, the highest working temperature will reach up to 260℃ and the highest working pressure will be 220Mpa.   5. Multi-shot inclinometers  

Product Series	Product Size	Working Environment
		Maximum Working Pressure (MPa)	Maximum Working Temperature (℃)	Minimum Inner Diameter of drill tool (mm)
Φ35 Multi-shot Electronic Inclinometer(120MPa)	Φ35x4126	120	125	45
Φ45 Multi-shot Electronic Inclinometer(120MPa)	Φ45x4609	120	125	57
Φ35 Small Diameter High Temperature Multi-shot Electronic Inclinometer(150MPa)	Φ35x4566	150	260	45
Φ45 High Temperature Multi-shot Electronic Inclinometer(120MPa)	Φ45x4800	120	260	57
Φ45 High Temperature Multi-shot Electronic Inclinometer(220MPa)	Φ45x4800	220	260	57

    Packaging & Shipping   One full set of instrument will be packaged in two aluminum alloy instrument cases with wooden case outside. Like below pictures:       Company Information  Hekang Science&Technology Development Co., Ltd is founded in 1996. We are a leading company specializing in the R&D and manufacturing of electronic inclinometers(measuring well inclination, azimuth, tool face, high side etc.) in China. Our tools are with super quality and definitely competitive prices. We supply high quality measuring instruments to CNPC and Sinopec Group for alomost 20 years. Almost every oilfield in China are using our instruments. The same time, our tools are also being used in more than 20 countries.             Our Services     “Customer first” is the principle of Hekang. We are committed to provide users with excellent product and superior service.   We guarantee a 100% of pass rate when deliver the products.   The warranty period for product quality assurance is 1 year. Within 1 year after using the instrument, if the instrument (or component) fails working normally (non-operational reasons), our company promises to repair, free of charge. When we repair the product, we will try to save the value of customers' products.   Hekang will make a reaction within 24 hours after receiving notice of customer service requirements and take appropriate measures according to the actual situation, sending service personnel to provide on-site service if necessary.